Settings Tab - 3xLogic Vigil Server V5.00 User Manual

2.6.1.1

Settings Tab

Dwell Timer
Normal
Open/Closed
Auto Acknowledge
Schedule
Alarm Input
Enabled
Note:
The smallest time interval that can be used is 15 minute periods.
Moving a time
period
Copying a time
period
Changing the start
or end time of a
period
Importing a
schedule from
3xLogic Vigil System Server Software - User's Guide
The number of seconds the digital input/output remains active after a trigger occurs.
If the digital input/output is normally open, select the "Normal Open" option. If the
digital input/output is normally closed, select the "Normal Closed" option. When the
input changes state, the alarm will be triggered.
Mark enabled for the alarm to be automatically acknowledged after the selected
number of seconds have passed.
Allows you to configure the input alarm to operate on a schedule.
Sections that have the input alarm enabled are colored green.
Expands and contracts the time graph horizontally. This allows for better precision in
setting your time periods.
Expands and contracts the time graph date graph vertically.
Click and hold the "Shift" key and click-and-drag the section.
Click and hold the "Ctrl" key and click and drag the section.
Select the section by clicking on it and then click and drag the right of left edge of
the section.
Select the digital input from the "Import From Digital Input" dropdown box list and
then click "Import".
Doc# 08100610 Page 99