3xLogic Vigil Server V5.00 User Manual page 64

Camera Control
Type
COM Port
Address
Advanced Settings
Auto Restart PTZ
Enable Auto Restart PTZ for Vigil Server to automatically restart the pattern, preset or tour after the PTZ
has been moved manually.
Mode
Timeout
Name/Number
Alarm Event
3xLogic Vigil System Server Software - User's Guide
The type of PTZ camera that is connected to your DVR.
The COM port that the PTZ camera is connected to your DVR. If a message titled
"CONFLICT" appears below the camera type drop-down, then there is another
camera or data terminal that is set up to use that COM port or the address specified.
The name of the conflicting camera or data terminal is displayed at the end of the
message. Determine which device is connected to the specified COM port and
address and modify the camera settings appropriately.
The address of the camera when multiple cameras are attached via the COM port.
See your camera's user manual for this information.
Opens the "Advanced Camera Controls" window.
Selects which action to apply after the timeout has been reached. Available options
are "Patterns", "Presets", and "Tours".
The number of minutes to wait after manual camera movement has stopped before
the automatic restart.
Enter the name or number of the pattern, preset, or tour to automatically restart
after the timeout period has elapsed.
Doc# 08100610 Page 64