Video Loss Tab - 3xLogic Vigil Server V5.00 User Manual

Notify All / First
Connection
Attempts
Retry Delay
2.1.9

Video Loss Tab

If the video signal is lost from an enabled camera, you can specify an action to take in the "Video Loss" tab.
Video Loss Mode
Active Signal
Detection
Sensitivity
Blank Camera
Detection
Record Blank
Camera
Video Loss Email Notification
Enabled
Video Loss Trigger
Enabled
Output Relay
Trigger
2.1.9.1 Video Loss Email Notification
When enabled and live video is lost for the selected camera, email is sent to recipients specified in the Email
Settings.
3xLogic Vigil System Server Software - User's Guide
Allows you to select if all client connections receive motion alarm notifications or only
the client connection at the top of the list.
The number of attempts to retry sending a motion alarm to a client connection.
Number of seconds to wait between retries.
Enables hardware signal loss detection if the capture card has support for this
feature.
Allows adjustment of the software signal loss detection algorithm.
Enables software signal loss detection.
hardware signal loss detection.
Enables the DVR to continue recording during signal loss detection events. Normal
operation turns off recording for video feeds with no signal detected.
Enables email notification for video loss events for the selected camera. Click "Email
Settings..." to configure email settings and email notification recipients.
Enables an output relay to be triggered when a video loss is detected for the selected
camera.
Specifies which detected relay to trigger.
There are two trigger types: a momentary trigger of 2 seconds or a latched trigger
which will stay triggered until video feed is recovered.
Can be used in addition or in place of
Doc# 08100610 Page 75