3xLogic Vigil Server V5.00 User Manual page 61

Here you configure which regions of the video image are to be used for motion detection. To do this, simply
draw on the video window. A semi-transparent overlay will be drawn over top of the video. This marks the
motion detection region.
removed.
Invert Swaps masked and clear regions.
Clear Clears all masked areas.
Set All Masks the entire image for motion detection.
The preview window will display the motion detection blocks and their real-time motion
values.
Test Motion settings.
Sensitivity" slider.
3xLogic Vigil System Server Software - User's Guide
To clear motion detection regions, click and draw on them and they will be
Values highlighted in yellow with red text have met your motion detection
You can use the motion detection values reported to tune the "Motion
Doc# 08100610 Page 61