General Tab - 3xLogic Vigil Server V5.00 User Manual

2.1.8.2.1 General Tab

Schedule
Enabled
Output Relay
Output Relay
Trigger
Post Motion Record
The length of time that the camera continues to record after the motion alarm has stopped being detected.
Note:
Creating or modifying the motion alarm schedule will not affect the schedule created by
cameras in recording mode "Schedule". They are both independent of each other.
3xLogic Vigil System Server Software - User's Guide
Check the "Enabled" box to record a schedule in which the motion alarm can only be
triggered. Click the "..." button to open the "Schedule" window or edit an existing
motion alarm schedule.
When an output relay is selected, the relay is triggered when the motion alarm
criteria is met.
There are two trigger types: a momentary trigger of 2 seconds or a latched trigger
which will stay triggered until motion stops.
Doc# 08100610 Page 69