Table of Contents
Advertisement
Quick Links
Introduction
MultiPower Industrial Media Converters per-
form 10/100 switching copper-to-fiber con-
version, and feature plug-and-play operation
and a miniature size. They also comply with
the IEEE 802.3af Power over Ethernet stan-
dard. In addition, these converters include an
extended voltage range; an extended operat-
ing temperature; and DIN clips for mounting
the enclosure on a DIN-rail.
LIC022A
TP-TX/FX-MM1300-ST [2 Km]
LIC023A
TP-TX/FX-MM1300-SC [2 Km]
LIC024A
TP-TX/FX-SM1310/PLUS-ST [40 Km]
LIC025A
TP-TX/FX-SM1310/PLUS-SC [40 Km]
LIC026A
TP-TX/FX-SM1310/LONG-ST [80 Km]
LIC027A
TP-TX/FX-SM1310/LONG-SC [80 Km]
LIC052A
TP-TX/SSFX-SM1310-SC (1310xmt/1550rcv) [20 Km]
LIC053A
TP-TX/SSFX-SM1550-SC (1550xmt/1310rcv) [20 Km]
LIC054A
TP-TX/SSFX-SM1310/PLUS-SC (1310xmt/1550rcv) [40 Km]
LIC055A
TP-TX/SSFX-SM1550/PLUS-SC (1550xmt/1310rcv) [40 Km]
LIC056A
TP-TX/SSFX-SM1310/LONG-SC (1310xmt/1550rcv) [60 Km]
LIC057A
TP-TX/SSFX-SM1550/LONG-SC (1550xmt/1310rcv) [60 Km]
Installing the Media Converter
The MultiPower Industrial Media Converter installs virtually anywhere: as a
standalone, table-top device or on a DIN-rail. As a standalone device, install
these miniature media converters in locations with extremely limited space. You
can also use the included velcro strips to attach the device to most surfaces.
MultiPower Industrial Media
Converters Installation Guide
LIC022A - LIC023A - LIC024A - LIC025A - LIC026A - LIC027A
LIC052A - LIC053A - LIC054A - LIC055A - LIC056A - LIC057A
1
Q U I C K
Introduction
S T A R T
1
1
2
2
3
3
3
7
7
Advertisement
Table of Contents
Related Manuals for Black Box LIC022A
Summary of Contents for Black Box LIC022A
-
Page 1: Installing The Media Converter
MultiPower Industrial Media Converters Installation Guide LIC022A — LIC023A — LIC024A — LIC025A — LIC026A — LIC027A LIC052A — LIC053A — LIC054A — LIC055A — LIC056A — LIC057A Q U I C K S T A R T Introduction Introduction... - Page 2 A I L O U N T I N G The MultiPower Industrial Media Converter ships from the factory with DIN-clips, allowing installa- tion on a DIN-rail. Depending on the installation, you can mount the media converter parallel or perpendicular to the DIN-rail. Use the supplied screws to attach the DIN clip to the media converter, then snap the con-...
-
Page 3: Led Operation
Operating The Media Converter The MultiPower Industrial Media Converter is a 10/100 auto-negotiating, miniature media converter. The fiber port always operates at 100 Mbps FDX; the copper port auto-senses the connected device’s speed and duplex mode: 10 Mbps or 100 Mbps and HDX or FDX (including Flow Control). The MultiPower Industrial Media Converter offers plug-and-play operation, including the AutoCross feature which automatically selects between a crossover work-station or pass-through connection depending on the connect-... -
Page 4: Specifications
D C P A S C A D I N G O W E R When installing multiple MultiPower Industrial Media Converter units on a DIN-rail, you can use one DC input source then cascade from one DC block to the next, until reaching the maximum current available. Specifications DC Input Voltage: 5 to 50 VDC on DC terminal and DC jack... -
Page 5: General Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support, 24 hours a day, 7 days a week: Call: 724-746-5500 or Fax: 724-746-0746 Mail order: Black Box Corporation 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com E-mail: info@blackbox.com... - Page 6 3) Hold boards by the edges only; do not touch the electronic components or gold connectors. 4) After removal, always place the boards on a grounded, static free surface, ESD pad or in a proper ESD bag. Do not slide the board over any surface. D C P O W E R U P P L Y...
- Page 7 Electrical Equipment Designed for use within Certain Voltage Limits (73/23/EEC). Certified to Safety of Information Technology Equipment, Including Electrical Business Equipment. For further details, contact Black Box. Class 1 Laser product, Luokan 1 Laserlaite, Laser Klasse 1, Appareil A’Laser de Classe 1 A R R A N T Y Contact Black Box for warranty information.
- Page 8 © 2005 Black Box. All rights reserved. The information in this document is subject to change without notice. Black Box assumes no responsibility for any errors that may appear in this document. Brands or product names may be trademarks and are the property of their respective compa- nies.
Need help?
Do you have a question about the LIC022A and is the answer not in the manual?
Questions and answers