AT&T CL83143 Abridged User Manual page 35

Multiple handset use
Intercom
Using the telephone base:
1. Press MENU/
p
to scroll to Intercom, then press
DIR
If you have one handset, the telephone base shows Calling HANDSET X.
•
• If you have more than one handset, the telephone base shows
TO:
Use the dialing keys to enter a specific handset number (1-9 for
handsets 1-9,
followed by # for all handsets),
desired handset and press
Calling HANDSET X or Calling all handsets.
The destination handset(s) rings and shows Base is calling, BASE 0 is
calling or BASE 0 is calling all.
2. To answer the intercom call, press
dialing key (0-9, TONE or #) on the destination handset. Both the base and
the handset now show Intercom.
3. To end the intercom call, one party presses
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
in idle mode to enter the main menu. Press q
SELECT
TONE followed by 0-2 for handsets 10-12, or TONE
/SELECT.
MENU
q
or press
/SELECT. The telephone base shows
MENU
PHONE/
29
or p
to scroll to the
CID DIR
/SPEAKER or any
,
FLASH
OFF/ , or places the
CANCEL
or
CID
INTERCOM