Placement - Hotpoint MWX 431.1 X Instructions For Use Manual

• Adapters, multiway strips and must
be used. Overloading can result in
fire.
• If the appliance is not fitted with a supply
cord and a plug, the connection equip-
ment must have a contact separation in
all poles that provide full disconnection,
and the appliance must be incorporated
in the fixed wiring in accordance with the
wiring rules.
•
If a longer power cord is used the
marked electrical rating should be at
least as great as the electrical rating of
the appliance .It must be 3 core and
earthed.
Installation dimensions
Nota: There should be gap above the oven.
not
min. superficie de aireación 250 cm
2

Placement

 The appliance may be installed on a firm surface
under a worktop or in a tall kitchen unit that has the
appropriate dimensions for a built- in installation
(See below) .
Never use the appliance immediately (wait 1 to 2

hours) after moving it from a cold place to
a warm place because condensation could cause a
malfunction .
Make sure the

ventilation.
The panels of the adjacent cabinets must be made

of heat resistant material. In particular, cabinets with
a veneer exterior must be assembled with glues
which can withstand temperatures of up to 100° C .
Do not cover the air vents.

 Do not place the microwave next to a heat source
Transmitting and receiving equipment such as

Radios and televisions can affect the
operation of the microwave oven.
In compliance with current safety standards, contact

with the electrical parts of the oven must not be
possible once it has been installed.
All parts which ensure the safe operation of the

appliance must be removable only with the aid of a
tool.
The accessible surface of the appliance may be hot

during operation.
 Danger! Do not dismantle the appliance. Touching
internal components of this appliance can cause
serious personal injury or death.
min. superficie de
aireación 250 cm
cabinets provide sufficient
2
EN
3