Parts Catalog Changes; New Model Numbers; 4Hp Model Wiring Arrangement; 5Hp Model Wiring Arrangement - Troy-Bilt 47260 Owner/Operator Manua

PARTS CATALOG CHANGES (Continued from Page 3)
On Page 10:
• Change the Part Number for the Chipper Chute Assembly (see Ref. No.1) from 1901297 to 1901738.
• Change the Part Number for the Operating Instructions Decal (see Ref. No.5) from 1901151 to 1901715.
On Page 12:
• Delete the Engine On/Off Switch and Wire Harness Assembly that is shown in the drawing.
• Delete the three cable clips (Ref. No.1) that are located on the back, right comer of the frame. Note that the
4HP Model now has a cable clip located on the back, left comer of the frame. This clip holds the throttle cable
to the frame.
On Page 13:
• The new wiring arrangements for the 4HP and 5HP Models are shown in Figures 6 and 7.
Figure 6: 4HP Model Wiring Arrangement.
NEW MODEL NUMBERS
Figure 7: 5HP Model Wiring Arrangement.
The Model Numbers that appear on the front cover of the Owner/Operator Manual have changed as follows:
Model No. 47260 is now 47278 Model No. 47271 is now 47280
Model No. 47261 is now 47279 Model No. 47272 is now 47281
TROY-BILT MANUFACTURING COMPANY, 102nd 51. and 9th Ave., Troy, N.Y. 12180
For Parts Service, call Toll-Free: 1-800-648-6776· For Technical Service, call Toll-Free: 1-800-833-6990
GARDEN WAY BRANCH CANADA, 1515 Matheson Blvd. E., Unit B11, Mississauga, Ontario L4W 2P5
Call Toll-Free: 1-800-225-3585
1901523 (6/92) Printed in U.S.A. © 1992 Garden Way Inc.