Features And Controls Identification - Troy-Bilt 47260 Owner/Operator Manua

Seelio
Features and Controls
'------=----
FEATURES AND CONTROLS IDENTIFICATION
Figure 3-1 below and Figure 3-2 on Page 15 identify key features
and controls on the machine.
Wheel Drive Bail
Learn the location of the features
and controls on your machine be-
fore starting the engine. For de-
tailed step-by-step operating in-
structions, please refer to
"Section 4: Operation."
DANGER
ROTATING CUTTING BLADES
WILL CAUSE SERIOUS
INJURY!
Do not allow hands or any other
part of the body or clothing in-
side the vacuum inlet, chipper
chute, or discharge deflector
chute when engine is running.
Before inspecting or servicing
any part of the machine, shut off
engine, disconnect spark plug
wire from spark plug, and make
sure that all moving parts have
come to a complete stop.
NOTE: All references to left,
right, front and rear of the ma-
chine are determined by stand-
ing behind the handlebars and
facing the direction of forward
travel.
Engine
On/Off Switch
Collection -
Bag
Discharg e
----':---==----=:1
Deflector
Gear Shift Lever
Chute Extension
- - - Chipper Chute
Chipper Blade
=====-__
(mounted on
opposite side
of Rotor)
Safety Interlock Switch
Vacuum Inlet
Figure 3-1: 5HP Model shown above (with vacuuming attachment removed
from vacuum inlet for clarity).
14