Check Content Parts; Connect The Hose Adapter And Hose End To Opposite Ends Of The Hose - Troy-Bilt 47260 Owner/Operator Manua

Thank you for purchasing a Vacuum Hose Kit (Part Number 1901111) for your TROY-BILT®
ChipperlVac. We know it will perform to your complete satisfaction if assembled and used properly.
Refer to the illustration below showing all the kit components shipped to you. Be sure you received
everything, and follow the assembly instructions given here. Refer to your Owner/Operator Manual for
in-use information. Please contact us if you have any questions at all.
o
Vacuum Hose Kit- check components shipped to you.
WARNING
Be sure to consult your TROY-BllT ChipperNac
Owner/Operator Manual for complete operating
and safety instructions concerning the
installation and use of any attachment.
Failure to comply could result in serious
personal injury.
Hose, 10-feet long 1908589-1
Hose Adapter Assy. with
safety interlock lanyard 1908614 1
Hose End 1908588 1
Back Strip 1908686 1
Handle* (long section) 1908639005 1
Handle* (short section) 1908687005 1
Screw, 1/4"-20 90005 1
Nut, 1/4"-20 03207 1
Grip(mounted on handle) T239797 1
Hose Clamp 1908666 2
Screw, 5/16"-18 x 3/4" 90007 1
Screw, 5/16"-18 x 1-3/4" 90009 1
Nut, 5/16"-18 9846 2
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Description Part No. Qty.
• You may have received a one-piece handle design instead of the
two-piece handle design. Both are illustrated here.
@
Connect the Hose Adapter and Hose End to opposite ends of the Hose.
Unwind the Hose (Ref. No.1) and extend it
fully. Both ends of the hose are the same.
Slip a Hose Clamp (Ref. NO.1 0) loosely over
each end of the hose. Now slide one end of the
hose on the Hose Adapter Assembly (Ref. No.
2). Position the Hose Adapter Assembly so its
tab is facing up. Tighten the screw in the Hose
Clamp securely. Slide the other end of the hose
over the straight end of the Hose End (Ref. No.
3). Be sure the angled end of the Hose End
faces up just like the tab on the Hose Adapter
Assembly. Tighten the Hose Clamp screw.