Advertisement
Select operating mode
Press the operating mode button
to select one of 5 modes.
Operating modes with time program
The controller offers both time programs Automatic
and Exception day
Do you feel too warm / too cold ?
Press
or
to set the temperature. The setting is temporary and active only until the next time the controller activates a change.
Note:
To set your own programs, see: "Enter customized temperatures and switching
times".
Continuous operating modes
The controller offers continuous operating modes "Continuous comfort mode"
"Continuous energy saving mode"
and frost protection mode
Do you feel too warm / too cold ?
Press
or
to set a continuous temperature.
Enter time and date
Slider in position 1 (time setting): Press
or
Slider in position 2 (date: Day/month/year): Press
RUN
Reset the slider to the RUN position.
Note:
You do not need to enter time and date when DCF77 receiver for the time signal
from Frankfurt (Germany) is equipped. The time display shows PASS.
Enter customized temperatures and switching times
The controller has three different switching patterns that you can allocate to the weekday blocks 1-5 or weekend block 6-7.
Proceed as follows:
Select operating mode
or
.
Slider in position 3 (weekdays
, weekend
Slider in position 4 (number of comfort phases): Press
Slider in position 5 (start time comfort phase 1): Press
Slider in position 6 (temperature comfort phase 1): Press
Slider in position 7 (end time comfort phase 1): Press
,
,
Slider positions 8...10 (comfort phase 2) and slider positions 11...13
(comfort phase 3): Same procedure as above for comfort phase 1.
,
,
Slider in position 14 (energy saving temperature in time switch programs Automatic and Exception day): Press
to set the temperature.
Note:
The energy saving temperature is valid Monday through Sunday.
It does not depend on operating mode "Continuous energy saving".
RUN
Move the slider to RUN position and close the cover.
Notes (e.g. individual settings):
B2203en
.
,
.
to set the time.
or
to set the date.
): Press
or
to select the desired block.
or
to set the number of comfort phases.
or
to set the start time.
or
to set the temperature.
or
to set the end time.
Enter holidays or absence
You can enter start, temperature and end of your holidays. The controller switches to the set holiday temperature at the start of the holidays
and back to the preset operating mode at the end of the holidays.
During holiday mode, symbol
flashes and the end of the holidays is displayed.
Proceed as follows:
Slider in position 15 (start of absence): Press
Slider in position 16 (temperature during absence): Press
Slider in position 17 (end of absence): Press
Move the slider back to RUN. Symbol
RUN
To quit holiday mode prematurely, press
Enter temperature for active remote control
With remote control, you are free to select the temperature. Activating remote control immediately enables control to the remote operating
temperature regardless of the current operating mode. After you switch off remote control, the device returns to the set operating mode.
Symbol
flashes with active remote control.
Proceed as follows:
Slider in position 18 (temperature for active remote control): Press
control.
Move the slider back to RUN.
RUN
Reset to factory settings
Press
and
together with the operating mode button
default values.
The clocks starts at 12:00.
Caution: All customized settings are lost !
Factory settings: Heating
,
,
,
,
,
Factory settings: Switching times
Comfort phases
P1
1.
07:00
2.
06:00
3.
06:00
Activate Party mode
or
You can activate Party mode only in operating modes
selectable time.
In Party mode, symbol
is displayed along with the end of Party mode.
1. Press
for 3 seconds.
Press
or
to set the duration for Party mode. Party mode can last max. 9 hours. The entry is accepted after
2.
20 seconds or when you press
3. Press
or
to set the temperature.
4.
Party mode ends automatically after the Party duration ends or when you press
or
.
24.12.2007
or
to set the start of the holidays (date).
or
to set the temperature effective during the holidays.
or
to set the end of the holidays (date).
appears to the left of symbol
.
,
,
,
or move the slider.
or
to set the temperature for active remote
for 3 seconds. All temperature and time settings are reset to
20 °C
16 °C
8 °C
12 °C
P2
P3
P4
P5
23:00
PASS
PASS
PASS
PASS
08:00
17:00
22:00
PASS
PASS
08:00
11:00
13:00
17:00
22:00
and
. In Party mode, the device controls to any selectable temperature for any
.
P6
Siemens, Building Technologies
Advertisement
