In-Tone & Out-Tone (Individual Pet) Rename Pet Relearn Pet Remove Pet Pet Tracking ASSISTANCe Indicator Light Firmware Updates About Serial Number Troubleshooting Reset Button Replacement Parts and Accessories Terms of Use and Limitation of Liability Important Recycling Advice Battery Disposal Compliance Warranty www.petsafe.net...
To Change Flap Operational Mode: 1 From the Main Menu, select Setup > Door Settings then select Door 2 Use right arrow key to scroll through options to select Smart Mode, Open, or locked Press left arrow/back key to return to Main Menu www.petsafe.net...
2 Use down arrow key to highlight which setting to change Use right arrow key to change the setting When setting Time or Date, use right and left arrow keys to move between the fields and press enter key to accept once last field is set www.petsafe.net...
In/Out (which is default factory setting), In-Only, Out- Only, and Timer Re-latch Time: Amount of time the multi-point Locking U-Flap system takes to re-latch and lock once a microchip/Passport ™ Key is no longer detected for any pet set to Master Access www.petsafe.net...
Access Time menu screen to make sure what you entered is correct If 2 time slots have NOT been programmed, you will receive an error screen. The Master Access Mode will then default back to In/Out Mode. www.petsafe.net...
1 From Main Menu select Setup > Pet Settings > Master Access Use right arrow key to select 2 Use down arrow key to highlight Re-latch Time then use right arrow key to scroll through to find desired Re-latch Time Press left arrow/back key to return to Main Menu www.petsafe.net...
Pet Access: Menu where you can change the Access Mode, Re-latch time, In-Tone, and Out-Tone for an individual pet Rename Pet: Allows the default name assigned by the Cat Flap to be changed to actual Pet Name or allows name to be changed www.petsafe.net...
Pet’s menu will not show on the screen because they cannot be changed These settings for the pet will default to the ones under Master Access (see “Master Access”) If Timer Mode is selected, Access Times must be set with a minimum of two programmed times required (see “Timer Mode”) www.petsafe.net...
7 pm), you would want to set that specific pet’s access mode to In/Out at 7 am and to In-Only Access mode at 7 pm 12 am 7 am 12 pm 7 pm 1 1 pm In-Only example: In/Out After using Timer Mode to program the example listed, this is what the Access Time menu screen would display: www.petsafe.net...
Navigation to scroll through the text entry screen to Clr (clear) Press enter key on 5-Button Navigation to clear name Use arrow keys to select letters on text screen to type pet’s name Select the symbol on text screen to complete the new name www.petsafe.net...
From Main Menu use down arrow key to find pet you wish to view Highlight name and press right arrow key to select The last 4 dates and times your pet used the Cat Flap, along with the locations, are displayed www.petsafe.net...
“Updates” page to see what firmware version is on your Cat Flap, the latest firmware version available and to download any updates About On the About screen, you can view the firmware version of your Cat Flap, the Serial Number and the PetSafe web address To find the About ®...
Troubleshooting The answers to these questions should help you solve any problems you have with the Cat Flap If they do not, please contact our Customer Care Centre or visit our website at www.petsafe.net TROUBLESHOOTING PROBleM SOlUTION Cat Flap does not respond to a programmed pet when pet is • Check to make sure flap operational mode is Smart Mode (see “Flap...
Reset Button Push and then release After your Cat Flap reboots, the startup screen will appear and then return to Main Menu Replacement Parts and Accessories Intelligent Cat Flap can be purchased by visiting www.petsafe.net or by contacting our Replacement parts or accessories for your Passport ™...
Radio Systems Corporation are in violation of EU R&TTE regulations, could void the user’s authority to operate the equipment, and void the warranty The Declaration of Conformity can be found at: http://www petsafe net/customercare/eu_docs php...
Page 17
Should you have any queries or require any further information, please contact our Customer Care Centre on 1800 786 608 (Australia) or 0800 543 054 (New Zealand) Covered by U S Patent 6,141,91 1 Other patents pending www.petsafe.net...
Page 18
Pour en savoir plus sur notre vaste gamme de produits, comprenant des systèmes de confinement, de dressage, de contrôle de l’aboiement, des chatières, des produits consacrés à la santé et au bien-être, de gestion des déjections, ainsi qu’au jeu et aux défis, rendez-vous sur notre site www petsafe net PetSafe -producten zijn ontworpen om de relatie tussen u en uw huisdier te verbeteren Bezoek onze ®...
Need help?
Do you have a question about the Passport PPA19-20558 and is the answer not in the manual?
Questions and answers