Terminology - Teknetics TreasureTek Elite Owner's Manual

TROUBLESHOOTING
TROUBLESHOOTING GUIDE
SYMPTOM CAUSE
Detector chatters • Using detector
or beeps erratically indoors
• Using detector near
power lines
• Using 2 detectors in • Keep 2 detectors
close proximity
• Highly oxidized
buried object
• Environmental
electromagnetic
interference
Constant low tone • Discharged battery
or constant repeating
tones • Wrong type of
battery
LCD does not lock • Multiple targets
on to one Target-ID present
or detector emits • Highly oxidized target
multiple tones • Sensitivity set
too high
No power, no sounds • Dead battery
• Cord not connected
securely
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
The manufacturer declares that the minimum ESD performance criteria is 1) the unit shall not
be permanently damaged and 2) operator intervention is allowed.
E
This product meets the requirements of Industry Canada: CAN ICES-3 B/NMB-3 B.
22
SOLUTION
• Use detector
outdoors only
• Move away
from power lines
at least 6 meters
(20') apart
• Only dig up
repeatable signals
• Reduce sensitivity
until erratic
signals cease
• Replace battery
• Use only 9V
alkaline battery
• Move coil slowly
at different angles
• Reduce sensitivity
• Replace battery
• Check connections

TERMINOLOGY

The following terms are used throughout the manual, and are standard
terminology among detectorists.
Reference to a metal being "eliminated" means that the detector will not
ELIMIN TION
emit a tone, nor display a Target-ID, when a metal object passes through
the searchcoil's detection field.
When the detector emits different tones for different types of metals, and
DISCRIMIN TION
when the detector "eliminates" certain metals, we refer to this as the
detector "discriminating" among different types of metals.
Discrimination is an important feature of professional metal detectors.
Discrimination allows the user to ignore trash and otherwise undesirable
objects.
A relic is an object of interest by reason of its age or its association with
RELIC
the past. Many relics are made of iron, but can also be made of bronze
or precious metals.
Iron is a common, low-grade metal that is an undesirable target in certain
IRON
metal detecting applications. Examples of undesirable iron objects are old
cans, pipes, bolts and nails.
Sometimes, the desired target is made of iron. Property markers, for
instance, contain iron. Valuable relics can also be composed of iron;
cannon balls, old armaments and parts of old structures and vehicles can
also be composed of iron.
Metals which are made of, or contain, iron.
FERROUS
Pinpointing is the process of finding the exact location of a buried object.
PINPOINTING
Long-buried metals can appear exactly like the surrounding soil, and can
therefore be very hard to isolate from the soil.
Meaning "voltage controlled oscillator," the V.C.O. audio method causes
V.C.O.
both the audio pitch and the volume to rise as signal strength increases.
V.C.O. improves the user's ability to interpret a target's size and depth.
Very weak signals (for small or very deeply buried objects) have the
faintest volume and the lowest pitch. Larger objects, and those closer to
the searchcoil, will induce a higher volume and higher pitch sound.
Ground Balancing is the ability of the detector to ignore, or "see through,"
GROUND B L NCE
the earth's naturally occurring minerals, and only sound a tone when a
metal object is detected. This detector incorporates proprietary circuitry to
eliminate false signals from severe ground conditions.
3