0 Internet
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (.p1) to your
phone before you can connect to a Wi-Fi network with EAP-TLS
authentication protocol. Ask the Wi-Fi network administrator where
you can get or download the network certificate.
1.
Save the certificate file to the root folder of the storage card.
2.
Press HOME
3.
Tap Install from SD card.
4.
Select the network certificate needed to connect to the EAP-TLS
network.
5.
Follow the steps in the previous section to connect to the Wi-Fi
network.
Checking the wireless network status
1.
Press HOME
2.
On the Wireless & networks screen, tap Wi-Fi settings, and then
tap the wireless network that the phone is currently connected to.
A message box is then displayed showing the Wi-Fi network name,
status, speed, signal strength, and more.
If you want to remove the wireless network settings on your phone,
tap Forget on this window. You need to enter the settings again if you
want to connect to this wireless network.
> MENU, and then tap Settings > Security.
> MENU and then tap Settings > Wireless & networks.