Table of Contents
Advertisement
3.
Make sure that the headset is discoverable.
4.
Tap the headset's name in the Bluetooth devices section.
5.
If prompted to enter a passcode, try 0000 or 1, or consult the
headset/car kit documentation to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the
instructions in "Unpairing from a Bluetooth device" in this chapter, and
then follow the instructions under "Connecting a Bluetooth headset or
car kit" above.
Disconnecting or unpairing from a Bluetooth device
Disconnecting a Bluetooth device
1.
Press HOME
networks > Bluetooth settings.
2.
In the Bluetooth devices section, press and hold the device to
disconnect.
3.
Tap Disconnect.
Unpairing from a Bluetooth device
You can make your phone forget its pairing connection with another
Bluetooth device. To connect to the other device again, you may need
to enter or confirm a passcode again.
1.
Press HOME
networks > Bluetooth settings.
2.
In the Bluetooth devices section, press and hold the device to
unpair.
3.
Tap Disconnect & unpair.
> MENU, and then tap Settings > Wireless &
> MENU, and then tap Settings > Wireless &
Bluetooth
Advertisement
Table of Contents
Need help?
Do you have a question about the Merge and is the answer not in the manual?
Questions and answers