Connecting To A Wired Network - Sony SRS-X7 Help Manual

Connecting to a Wi-Fi network using a computer
If your wireless router does not have a WPS button, use your computer to connect the speaker to the Wi-Fi network.
Select one of the connecting methods from below.
Connecting to a Wi-Fi network using a computer connected with a LAN cable
Connecting to a Wi-Fi network using a computer connected wirelessly
To connect to a wired network

Connecting to a wired network

Connect the speaker to a wireless router with a LAN cable, then connect the wireless router and computer.
To turn off the wireless function
With the speaker turned on, press and hold both the NETWORK button and WPS button. When the
and NETWORK indicators begin to flash at the same time, the wireless function turns off. To turn on the wireless
function, do the above again.
Note
If you turn off the wireless function, the Wi-Fi network, BLUETOOTH and NFC functions will not be available.
Related Topic
Connecting to a Wi-Fi network using "SongPal" (Smartphone)
Connecting to a Wi-Fi network using "SongPal" (iPhone)
Checking the Wi-Fi signal strength (reception sensitivity)
Notes on use
4-537-384-11(2)
Copyright 2014 Sony Corporation
(BLUETOOTH)
144