Sony SRS-X7 Help Manual page 279

Help Guide
Troubleshooting
Personal Audio System
SRS-X7
There is no sound, or the sound skips during playback.
Make sure that the iPhone/iPod touch/iPad or computer with iTunes is connected to your home network.
The server is overloaded. Quit all unnecessary running applications.
Wireless signal condition is poor. Stop using your microwave oven.
The communication speed of the Wi-Fi network may become slower for IEEE802.11n-compliant wireless
routers/access points if the security method is set to WEP or WPA/WPA2-PSK (TKIP). If slower speed occurs,
change the security method to WPA/WPA2-PSK (AES). The encryption (security) scheme varies depending on the
device. For details, refer to the operating instructions of your router/access point.
If the sound is interrupted or noise is generated via a Wi-Fi connection, connect the speaker and wireless router via a
LAN cable, not via Wi-Fi. If the quality still does not improve, also connect the computer and wireless router via a LAN
cable.
Related Topic
Checking the Wi-Fi signal strength (reception sensitivity)
Connection method 4: Connecting to a wired network
Notes on use
4-537-384-11(2)
Copyright 2014 Sony Corporation
267