Connecting To A Wired Network - Sony MHC-V77W Help Manual

Help Guide
Home Audio System
MHC-V77W

Connecting to a wired network

This section explains how to connect the home audio system to a wireless router with a LAN cable (not supplied), then how to
connect the router to the PC.
Usually the DHCP setting is set to ON when you connect your PC to the network.
Do the following before starting.
Set the DHCP setting of your PC to ON.
Check that your PC and wireless router are turned on.
1
Connect the wireless router to the LAN port of the home audio system with a LAN cable (not
2
supplied).
Connect the wireless router to your PC using another LAN cable (not supplied), or a Wi-Fi connection.
3
Turn the home audio system on.
4
The power indicator lights up in green, then the NETWORK indicator begins to flash in white. Wait about 2 minutes (in some
cases, 4 or 5 minutes) until
changes from flashing to staying lit in white.
lights up on the display. When the connection is completed, the NETWORK indicator
31