Sony SRS-X7 Help Manual page 124

and registering (pairing) and BLUETOOTH connection can be made.
10. Wi-Fi antenna
Set upright during Wi-Fi connection as below.
Push the right side of the antenna, and the antenna comes out from the recess.
Put up the antenna.
11. NETWORK OFF/ON switch
Turn the network function on and off. Set this switch to ON when connecting to the network.
12. RESET button
Push to reset the speaker.
13. WPS button
Press and hold when connecting to a Wi-Fi network.
Beeps will be heard by pressing and holding the WPS button for 2 seconds, which indicates that the speaker is
ready to connect to a wireless router.
If your wireless router has a WPS button, you can use this button to connect to the network.
14. DC OUT ONLY port (USB)
Connect a USB device, such as smartphone, using a USB cable (not supplied) to charge from the speaker. If you
play music on the connected USB device, sound will not be output from the speaker.
15. LAN port
Use a LAN cable (not supplied) to connect the computer or the wireless router.
16. AUDIO IN jack
Connect to the headphone jack of a portable audio device, etc., using a connecting cable (not supplied).
17. DC IN 18 V jack
Connect the AC adaptor (supplied).
Related Topic
About the indicators
Notes on use
4-537-384-11(2)
Copyright 2014 Sony Corporation
112