Connecting To A Wired Network - Sony SRS-ZR5 Help Manual

Help Guide
Personal Audio System
SRS-ZR5

Connecting to a wired network

This section explains how to connect the speaker to a wireless router with a commercially-available LAN cable, then how to
connect the router to the PC.
Usually the DHCP setting is set to ON when you connect your PC to the network.
Do the following before starting.
Set the DHCP setting of your PC to ON.
Check that your PC and wireless router are turned on.
1
Connect the wireless router to the LAN port with a commercially-available LAN cable.
2
Connect the wireless router to your PC using another commercially-available LAN cable, or a Wi-Fi
3
connection.
Turn the speaker on.
4
The (power) indicator lights up in green, then the LINK indicator begins to flash in pink. Wait about a minute until the LINK
indicator lights up in pink. When the connection is completed, the LINK indicator changes from flashing to staying lit in pink.
1