Protecting The Environment - Black & Decker Dustbuster WV6015 Original Instructions Manual

Brush any loose dust off the filters.

Wash the filters in warm, soapy

water. The bowl can also be washed
if necessary. Do not immerse the
appliance in water.
Make sure the dust bowl and the

filters are completely dry.
Refit the filters.

Refit the dust bowl into the

appliance. Make sure the dust bowl
clicks into place.
Warning! Never use the appliance
without the filters. Optimum dust
collection will only be achieved with clean
filters and an empty dust bowl.
Replacing the filters
The filters should be replaced every 6 to
9 months and whenever worn or
damaged. Replacement filters are
available from your Black & Decker
dealer (cat. no. WVF30).
Remove the old filters as described

above.
Fit the new filters as described

above.

Protecting the environment

Separate collection. This
product must not be disposed of
with normal household waste.
Should you find one day that your Black &
Decker product needs replacement, or if it
is of no further use to you, do not dispose
of it with household waste. Make this
product available for separate collection.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you purchase
a new product.
8
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
any authorised repair agent who will
collect them on our behalf.
You can check the location of your
nearest authorised repair agent by
contacting your local Black & Decker
office at the address indicated in this
manual. Alternatively, a list of authorised
Black & Decker repair agents and full
details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com.
Battery (fig. H)
When disposing of the product,
the battery must be removed as
described below and disposed of
in accordance with local
regulations.
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in
accordance with local regulations.
Warning! Disconnect the appliance from
the power supply before removing the
battery.
Preferably discharge the battery by

operating the appliance until the
motor stops.
The battery is located under the back end
of the appliance.
Remove the crevice tool from the

accessory holder.
Push the slider (10) towards the front

of the product.
Remove the accessory holder.

Strike the product on a firm and

stable surface as shown in fig. G to
dislodge the battery (11).
Alternatively, use a screwdriver to
dislodge the battery.
Place the battery in suitable

packaging to ensure that the
terminals cannot be short-circuited.