1. Manuals
  2. Brands
  3. Okina USA Manuals
  4. Security Camera
  5. SDNR-8700
  6. User manual

Okina USA SDNR-8700 User Manual

Dnr series 700 tvl dnr super low lux osd icr box camera
Hide thumbs Also See for SDNR-8700:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version
INSTALLATION
1.
Determine the location of the
External IR (top or bottom of
camera body).
3.
Center the bracket position
according to the two holes.
5.
Take the External IR and attach it to
the bracket with the small screw tie.
MADE IN TAIWAN
Copyright © 2013. All Rights Reserved.
www.okinausa.com
2.
Put the tiny bracket on the screw
base.
4.
Screw it tightly.
6.
Adjust the External IR to desired
position (forward or backward and
up or down).
T-417_T-416-IR
24
R201310-V14
SDNR-8700
700 TVL DNR Super Low Lux OSD
ICR Box Camera

USER MANUAL

* Lens not included
FEATURES
 700 TV Lines
 1/3" Sony Exview CCD II
 Digital Noise Reduction (DNR) -
noise. It also reduces DVR disk space usage by up to 70%.
 0.00039 (Sens-up, 256X) / 0.1 Lux (50 IRE @ F1.4)
 Built-in Microphone RCA Output
 RS485 Output for OSD Control
 330mA
 Dual Power 12V DC / 24V AC
Copyright © 2013. All Rights Reserved.
D
N
R
igital
oise
eduction
Optional External IR
SDNR-8IR14
See page 22 for details
Dramatically reduces both random and fixed
** Replacing SDNR-8630
PAL version also available

Advertisement

Table of Contents
loading

Related Manuals for Okina USA SDNR-8700

Summary of Contents for Okina USA SDNR-8700

  • Page 1: User Manual

    INSTALLATION Determine the location of the Put the tiny bracket on the screw SDNR-8700 External IR (top or bottom of base. camera body). igital oise eduction 700 TVL DNR Super Low Lux OSD ICR Box Camera Center the bracket position Screw it tightly.
  • Page 2 Please read the Manual before attempting to use this product. Specifications and appearance are subject to change without notice. Accessory cable for other cameras. 1. 12V DC, 1A input for IR power source. 2. 12V DC, 1A output for external device (camera) power. 3.

  • Page 3: Limited Warranty

    When the video product exhibits a distinct change in performance. LIMITED WARRANTY OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1.

  • Page 4: Package Contents

    PACKAGE CONTENTS SPECIFICATION One (1) DNR Vandal Proof Box Camera with power/video cable Model SDNR-8700 One (1) Remote Control System NTSC One (1) Allen Wrench Image Sensor 1/3” Sony Exview CCD II One (1) Motion Relay Output Wire NVP2190 / High End ASIC Solution...

  • Page 5: Rear Panel

    Motion detection, Privacy mask and language choice). SYNC INT is only in 12V DC power source. SYNC INT and L/L (line lock) are in 24V AC. The key combination to enter the camera’s OSD menu with OKINA USA’s RS485 PTZ controller PTZ-KB250X is SET + 95 + PRESET and for PTZ-KB050X is PRESET+95+ENTER.

  • Page 6: Operation

    OPERATION The Main menu provides access to the camera configuration options. The on-screen display (OSD) is only available in multi languages, such as English, Korean, Traditional Chinese, Simplified Chinese, Japanese, Russian, French, Spanish, Italian, Portuguese, Dutch, German, Polish, Turkish, Hebrew, Arabic. Program the camera by attaching a standard video monitor to the system.
  • Page 7 SELECT THE LENS In the Setup menu, go to Lens and select the type of lens used with the camera. Select DC to adjust the lens setting manually, Sens-up: Adjust the magnification of existing light sources to make it easier for the camera to pick up defective pixels.
  • Page 8 AGC: Adjust the maximum automatic gain control level, used in low-light conditions with the iris fully open. The values range from OFF to High. SENS-UP: The setting refers to the amount of light being allowed to load on the sensor from 2-times the "normal" light up to 256-times the "normal" light. This method can allow for brilliant, clear color images to be taken in nearly total darkness.
  • Page 9 Smart Zoom: When a motion is detected in a specific area chosen by user, the camera picture will Value: Set the value level of backlight compensation. The values range from zoom in on the area then zoom out. low to high Area: Set the area of the backlight compensation by position and the size.
  • Page 10 In the Setup menu, go to White Bal and select the options to be modified: Area display: Choose whether to enable the selected privacy mask. If enabled, you can also customize the position and size of the privacy mask. Menu Item Description Color: Set the color of the privacy mask.
  • Page 11 D&N BW mode: Select BW to manually set the camera to black and white mode Area: Select the motion detection zone (AREA1, AREA2, AREA3) that you Burst: Enable/disable the color burst component of the video signal when the want to configure. The selected zone will be blinking. camera switches to B/W.
  • Page 12 is the value, the more visible is the noise but the sharper is the picture. The Edge gain: Set the level of edge gain. The values range from 0 to 10 bigger is the value, the less visible is the noise but the less sharp is the picture Gamma: Set the level of gamma.

Table of Contents