Table of Contents
Advertisement
Quick Links
SIR42-365AI
SIR42-365AIP
42 IR Day & Night Weatherproof Color Camera
FEATURES
• 1/3" Ex-View CCD
• 650 TV Lines
• 42 IR LED
• 3.7mm~12.0mm Aspherical Auto Iris Vari-Focal Lens
• Mechanical IR Cut Filter – ICR
• IR Distance up to 120ft / 40m
Selectable IR projecting distance design (Hi/Mid/Low)
• 0.3 Lux @ F1.6
• External Function Adjustors
• Cable Management Bracket; IP66 Rating
• IR "on": 320mA (Low) / 420mA (Mid) / 750mA (High)
IR "off": 130mA
• 12V DC
Copyright © 2011. All Rights Reserved.
http://www.okinausa.com
Operational Manual
with Mechanical IR Cut Filter
1
I-337
R201110-V07
Advertisement
Table of Contents
Related Manuals for Okina USA SIR42-365AIP
Summary of Contents for Okina USA SIR42-365AIP
- Page 1 SIR42-365AI SIR42-365AIP Operational Manual 42 IR Day & Night Weatherproof Color Camera with Mechanical IR Cut Filter FEATURES • 1/3” Ex-View CCD • 650 TV Lines • 42 IR LED • 3.7mm~12.0mm Aspherical Auto Iris Vari-Focal Lens • Mechanical IR Cut Filter – ICR •...
- Page 2 Please read the Manual before attempting to use this product. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems). This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
-
Page 3: Package Contents
If the video product has been dropped or the cabinet has been damaged. e. When the video product exhibits a distinct change in performance. PACKAGE CONTENTS One (1) SIR42-365AI/SIR42-365AIP Camera with power/video cable and sunshield One (1) Allen Wrench Four (4) Screws... - Page 4 DIMENSIONS & PARTS FUNCTIONS OSD Button (Menu): Name Function LEFT LEFT ENTER Get in MENU and ENTER RIGHT RIGHT DOWN DOWN Copyright © 2011. All Rights Reserved. I-337 http://www.okinausa.com R201110-V07...
-
Page 5: Installation
INSTALLATION 1. Install Camera Use the supplied screws and secure the camera in position. 2. Adjust 2-Axis Bracket Adjust the bracket while checking the view angle from the monitor. Loosen the X-Y screws and then adjust the 2-Axis bracket (X-Y Axis) to get the desired viewing angle. - Page 6 3. Focus Adjustment Focus adjustment should be done with zoom focus at the same time. Use the screwdriver to adjust the zoom/ focus ratio (from wide to tele or near to far). NOTE: Focus adjustment position differs depending on model type. 4.
- Page 7 (1) Function Switch 1 Left Key 2 Up Key 3 Enter Key 4 Right Key 5 Down (2) IR Distance/Power Consumption Adjustment Installer may use IR adjustment function according to installation conditions. It is suggested that the view angle should be checked before setting up the IR distance.
- Page 8 6. Connect to Monitor Connect the Video-out port of the camera to a monitor. As the connecting method varies depending on the instrument, therefore refer to the manual supplied with the instrument for more information. 7. Connect the Power Connect to a 12V DC, 500mA adaptor. Copyright ©...
-
Page 9: Operation
OPERATION OSD Framework (A) Main Menu Display OSD Setup Menu page 1 LENS AUTO SHUTTER /AGC AUTO WHITE BAL BACKLIGHT PICT ADJUST NEXT EXIT SAVE ALL OSD Setup Menu page 2 PRIVACY MOTION DET CAMERA ID LANGUAGE ENGLISH CAMERA RESET BACK EXIT SAVE ALL... - Page 10 • =ENTER OSD Main Menu Description LENS: Manual / Auto Selectable • LENS: MANUAL Not adjustable. • LENS: AUTO TYPE：DC AUTO MODE：AUTO/ OPEN /CLOSE SPEED：000~255 AUTO Camera automatically controls the lens OPEN Lens fully open CLOSE Lens fully close SPEED Lens speed SHUTTER/AGC: Auto / Manual Selectable •...
- Page 11 AUTO IRIS: Exposure controlled by auto iris. When LENS is setup to Manual mode SHUT: Exposure controlled by electronic shutter. LOW LUMINANCE Setup low lux environment, minimum AGC level. • SHUTTER/AGC: MANUAL MODE：SHUT+AGC SHUTTER：1/60, 1/100, 1/250, 1/500, 1/1000, MANUAL 1/2000, 1/4000, 1/10000 AGC：6.00、12.00、18.00、24.00、30.00、36.00、...
- Page 12 • WHITE BAL: USER1 B-GAIN：000~255 USER1 R-GAIN：000~255 • WHITE BAL: USER2 B-GAIN：000~255 USER2 R-GAIN：000~255 • WHITE BAL: MANUAL LEVEL：19~54 MANUAL • WHITE BAL: ANTI CR The function can reduce the color rolling issue, and it is the same with CRS (Color Rolling Support) function. •...
- Page 13 LUMINANCE： Set the extent of the luminance compression CONTRAST： Set the extent of the contrast enhancement. NOTE: If you enable the ATR funciton, please avoid to enable the BACKLIGHT function in the same time. Y/C、Y、C、OFF NR MODE Y LEVEL 000~015 C LEVEL 000~015 NR MODE: Set the DNR mode of Y/C, Y and C.
- Page 14 SAVE ALL When you change the OSD menu settings, SAVE ALL before leaving the OSD. Press ENTER key to change the memory settings for the OSD. PRIVACY: On / Off Selectable • PRIVACY: ON AREA SEL Max. 8 000~244 (NTSC) / 000~288(PAL) BOTTOM 000~244 (NTSC) / 000~288(PAL) 560TVL：000~378 (NTSC)、000~370 (PAL)
- Page 15 MOTION: On / Off Selectable • MOTION DET: ON DETECT SENSE 000~127 BLOCK DISP ON / OFF / ENABLE MONITOR AREA ON / OFF AREA SEL 000~244 (NTSC) / 000~288(PAL) BOTTOM 000~244 (NTSC) / 000~288(PAL) 540TVL：000~378 (NTSC)、000~370 (PAL) LEFT 650TVL：000~474 (NTSC)、000~468 (PAL) 540TVL：000~378 (NTSC)、000~370 (PAL) RIGHT 650TVL：000~474 (NTSC)、000~468 (PAL)
- Page 16 CAMERA ID: On / Off Selectable A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 Each User Font 8 9 - ! ”...
-
Page 17: Specifications
Reset Factory default setup. BACK Return to MAIN MENU, page1. SPECIFICATIONS Model SIR42-365AI SIR42-365AIP NTSC System 1/3” Ex-View CCD Image Sensor Sony 976(H) x 494(V) 976(H) x 582 (V) Total Pixel Synchronizing Internal System 650 TV Lines Resolution 0.3 Lux @ F2.0 / 0 Lux @ IR “on”... -
Page 18: Limited Warranty
* Specifications are subject to change without notice. LIMITED WARRANTY OKINA USA products are covered under warranty for one (1) year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1. Camera sticker is removed If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased.