Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems). This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
When the video product exhibits a distinct change in performance. LIMITED WARRANTY OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1.
PACKAGE CONTENTS • One (1) 10x Mini PTZ Dome Camera • One (1) Mounting Base • Three (3) Mounting Base Screws • Three (3) Thread Connector Screws • One (1) Thread Connector • One (1) User Manual Options: Pendant Pole Bracket MB-CP10C L Type Wall Mount Bracket MB-CW1C...
FUNCTION DESCRIPTION Set Address Coding, Baud Rate, Control Protocol Any operation commands the camera has its own objectives address coding, baud rate, control protocol, a single camera only to respond with its own address coding, baud rate, control agreement under the operation of the command. Camera address coding, baud rate, control protocol specific settings please refer to the DIP settings.
Page 8
The camera lens in the following situations will not autofocus on the camera objectives: Target is not to screen center; Targets the same time in the far and near the place; Target light objects, such as neon lighting, spotlights and other luminous objects;...
15. Area Scan Just an external command or through a power-on action, free movement, alarm linkage, etc. to call, can make the ball machine horizontal direction to a certain speed, within the limits set by the community and from scanning. DIP SWITCH SETTING Four DIP switch is the baud rate and the control protocol switch.
OSD MENU SETTINGS Power-On Self-Test When power is connected to the dome camera, the camera in horizontal and vertical direction movement, the screen will appear system-related information, the dome camera self-test to complete the following diagram. Display: PELCO-D protocol, Baud Rate 2400, Address Code 1 Preset point setting and calling Set Preset points: •...
TABLE 3-1: MAIN MENU Menu Function Description SYSTEM INFORMATION Displays camera basic information (refer to table 3-2) ADDR SETTING Used to set the camera address (refer to table 3-3) MOTION PTZ setup menu (refer to table 3-4) PATTERNS Fancy scan setting (refer to table 3-5) CAMERA Lens setting (refer to table 3-6) CRUISE SETTING...
<MOTION> Menu is used to set PTZ parameters such as movement and orientation angles. As shown in the following table. TABLE 3-4: MOTION Menu Function Description SET FRAME: SCAN Set the area scan to the left and right limit (refer to table 3-4-1) POWER UP: NONE Power on setting menu (refer to table 3-4-5)
<POWER UP> The dome camera is powered on, didn’t receive any instructions to perform action. Parameters in the following table. TABLE 3-4-5: POWER UP Menu Function Description NONE Don’t perform any actions AUTO SCAN Perform continuous scanning action RANDOM SCAN Perform intermittent scanning action FRAME SCAN Perform area scanning action...
<PROGRAM PATTERN> TABLE 3-5-1: PROGRAM PATTERN Menu Function Description USE THE JOYSTICK OR Use the joystick or keyboard to move the camera KEYBOARD TO MOVE THE to the starting position, and press the IRIS+ key CAMERA TO THE STARTING to continue, and go to the table 3-5-2. POSITION IRIS OPEN TO CONTINUE TABLE 3-5-2:...
<IR SETTING> (IR speed dome special function) TABLE 3-8: IR SETTING Menu Function Description IR MODE: AUTO ON: IR light is forced to open; OFF: Infrared light is forced to close; AUTO: IR light is switch automatically. IR ON SENS: 250 Light intensity of IR light is open (81~254) IR OFF SENS: 230 Light intensity of IR light is closed (81~254)
TROUBLE SHOOTING & MAINTENANCE Failure Possible Cause Solutions Electricity without action, Connect the wrong power Corrections no images, light does not cord shine Power supply is damaged Replace Bade fuse Replace Power cord connection is Exclusion Power are self-test, there IR uniform dome camera To reset the high speed are images, not control...
SPECIFICATION Model SS10W-C100H Image sensor 1/2.8" Sony CMOS Signal model PAL/NTSC Horizontal resolution 1000 TVL Effective pixel 1280(Horizontal)x 720(Vertical) Minimum illumination Color to B/W, Color: 0.01Lux, B/W: 0.001Lux S/N radio >60dB (Enhanced) Backlight compensation On/Off White balance Auto Electronic shutter...