Specifications - NEC MultiSync FE750+ User Manual

Specifications

Monitor Specifications
Picture Tube
Viewable Image Size:
Input Signal
Display Colours
Synchronization Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory setting)
Active Display Area
(Full scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
NOTE: Technical specifications are subject to change without
notice.
MultiSync FE750+
Diagonal: 43 cm/17 inch
41 cm/16 inch
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. (Positive/Negative; TTL Level)
Vertical sync. (Positive/Negative; TTL Level)
Composite sync. (Positive/Negative; TTL Level)
Analog input: Unlimited number of Colours
Horizontal: 31 kHz to 96 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 146 Hz
832 x 624 @ 55 to 141 Hz
1024 x768 @ 55 to 116 Hz.....
1152 x 870 @ 55 to 103 Hz
1280 x 1024 @ 55 to 89 Hz
1600 x 1200 @ 55 to 76 Hz
Horizontal: 315 mm/12.4 inches
Vertical: 236 mm/9.3 inches
325 mm/12.8 inches
244 mm/9.6 inches
AC 100-120/220-240 V @ 50/60 Hz
1.3 A @ 100-120 V, 0.6 A @ 220-240 V
399(W) x 413(H) x 415(D) mm
19.0 kg
10 °C to +35 °C
30% to 80%
Humidity:
0 to 3000 m
Altitude:
-20 °C to +60 °C
10% to 90%
Humidity:
0 to 13500 m
Altitude:
English-15
Notes
90° deflection, 0.25 mm grill
pitch, medium short
persistence phosphor,
aperture grille CRT,
multi-layered, anti-static
screen coating, dark-tint
screen and OptiClear
screen.
Depends on display card
used.
Automatically
Automatically
Some systems may not
support all modes listed.
NEC-Mitsubishi Electronics
Display cites recommended
resolution at 85 Hz for
optimal display performance.
Dependent upon signal
timing used, and does not
include border area.
Dependent upon signal
timing used, and does not
include border area.