Canon imageRUNNER 2545 Series Service Manual Digest page 44

Bit Function
5 not used
6 not used
7 not used
● SSSW-SW33
List of Functions
Bit Function
0 count B4 (Print) as large size
1 not used
2 count B4 (Scan) as large size
3 the counter display type change in Japan and USA
4 not used
5 Toner cartridge replacement counter display
6 not used
7 not used
Detailed Discussions of Bit 0
Use it to specify whether B4 paper (Print) should be counted as large-size paper.
If 'yes' is selected, B4 paper will be counted as large-size paper.
If 'no' is selected, on the other hand, B4 paper will be counted as small-size paper.
Detailed Discussions of Bit 2
Use it to specify whether B4 paper (Scan) should be counted as large-size paper.
If 'yes' is selected, B4 paper will be counted as large-size paper.
If 'no' is selected, on the other hand, B4 paper will be counted as small-size paper.
Detailed Discussions of Bit 3/4
Select whether to switch the counter display type in effect in Japan and USA to the
conventional or new type. Select "Yes" to display counters in the new type.
Select "No" to display counters in the conventional type.
Bit4
Conventional type(type1) 0
New type(type2) 0
New type(type3) 1
New type(type4) 1
Detailed Discussions of Bit 5
Select whether to display the toner cartridge replacement counter.
1 0
- -
- -
- -
T-4-22 T-4-22
1 0
Yes No
- -
Yes No
Yes No
- -
Yes No
- -
- -
T-4-23 T-4-23
Bit3
0
1
0
1
T-4-24 T-4-24
When "1" is selected, the counter is displayed.
When "0" is selected, the counter is not displayed.
● SSSW-SW34
List of Functions
Bit Function
0 Display the waste toner full warning
1 Switch the waste toner full warning
2 User drum replacement menu display
3 not used
4 not used
5 not used
6 not used
7 not used
Detailed Discussions of Bit 0
You can select whether a waste toner full warning is to be displayed.
When "1" is selected, a waste toner full warning is displayed.
When "0" is selected, a waste toner full warning is not displayed.
Detailed Discussions of Bit 1
Select whether to display the waste toner full warning as a drum replacement required
message or as E019 displayed on an operator call. Select 1 to display a rum replacement
required message on an operator call. Select 0 to display E019 on an service call.
Detailed Discussions of Bit 2
Select whether to display the user drum replacement menu.
When "1" is selected, the menu is displayed.
When "0" is selected, the menu is not displayed.
1 0
Yes No
Drum replacement required
E019 displayed on
message displayed on an
an service call
operator call
Yes No
- -
- -
- -
- -
- -
T-4-25 T-4-25
4-11
4