Figure 2.11Power Input Connector - Advantech ARK-VH200 User Manual

Table 2.9: Power connector Pin Assignments
Pin
1
2
3
2.3.1.8 Power ON/OFF Button
ARK-VH200 comes with a Power On/Off button with LED indicators on the front side
to show its On status (Green LED) and Off/Suspend status (Orange LED). Dual func-
tions of Soft Power -On/Off (Instant off or Delay 4 Second), and Suspend are sup-
ported.
2.3.1.9 LED Indicators
There are two LED indicators on ARK-VH200 front panel for indicating system status:
GPS LED will flash when it receive GPS signal from satellites; and WLAN LED will
flash when it retrieval the data.
2.3.1.10 Power Output Connector
ARK-VH200 comes with a 4-pin Power Output Connector to provide 5 VDC and 12
VDC power. This power can be use for a panel or other peripherals, but neither
should exceed 1A current.
1 2 3
Figure 2.11 Power Input Connector
Signal Name
Ignition
GND
+9~32 V
DC
Figure 2.12 Power Button
Figure 2.13 LED Indicators
1 2
3 4
Figure 2.14 Power Output Connector
19 ARK-VH200 User Manual