Wheel Locks; Maintenance; Introduction; Maintenance Chart - Sunrise Medical Quickie Ti Titanium User Instruction Manual & Warranty

38
A. INTRODUCTION
1. Proper maintenance will improve performance and extend the useful life
of your chair.
2. Clean your chair regularly. This will help you find loose or worn parts and make
your chair easier to use.
3. Repair or replace loose, worn, bent or damaged parts before using this chair.
4. To protect your investment, have all major maintenance and repair work done by
your authorized supplier.
If you fail to heed these warnings your chair may fail and cause severe injury
to the rider or others.
1. Inspect and maintain this chair strictly per chart.
2. If you detect a problem, make sure to service or repair the chair
before use.
3. At least once a year, have a complete inspection, safety check and service of
your chair made by an authorized supplier.
B. MAINTENANCE CHART












930487 Rev. B
X I . M a i n t e n a n c e
CHECK...
Tire inflation level

Wheel locks

All fasteners for wear and tightness
Armrests
Axle and axle sleeves
Quick-release axles
Wheels, tires and spokes
Casters
Anti-tip tubes
Frame
Upholstery
Service by Authorized Supplier
X I . M a i n t e n a n c e
C. MAINTENANCE TIPS
1. Axles & Axle Sleeves
Check axles and axle sleeves every six months to make sure they are tight. Loose
sleeves will damage the camber tube and will affect performance.
2. Tire Air Pressure
Check air pressure in pneumatic tires at least ONCE A WEEK. The wheel locks will not
grip properly if you fail to maintain the air pressure shown on tire sidewall.
D. CLEANING
1. Bead Finish
To remove scuffs and scratches, use ScotchBrite® pad to buff lightly.
2. Axles and Moving Parts
a. Clean around axles and moving parts WEEKLY with a slightly damp
(not wet) cloth.
b. Wipe off or blow away any fluff, dust, or dirt on axles or moving parts.
NOTE– You do not need to grease or oil the chair.
3. Upholstery
a. Hand-wash (machine washing may damage fabric).
b. Drip-dry only. DO NOT machine dry as heat will damage fabric.
E. STORAGE TIPS
1. Store your chair in a clean, dry area. If you fail to do so, parts may rust
or corrode.
2. Before using your chair, make sure it is in proper working order. Inspect and
service all items on the "Maintenance Chart" (Letter B).
3. If stored for more than three months, have your chair inspected by an
authorized supplier before use.
39
930487 Rev. B