MBR1400 | USER MANUAL – Firmware version 5.0
CRADLEPOINT
This command returns info about the router along with the port names for ports with attached modems. These port
names may be helpful for using the commands that follow.
Example of response:
uptime: 0:35:13
FW: v4.4.0
eth0: 10/100/1000 Ethernet Switch: connected
usb3: MC200P: connected
mstatus: Get modem status*
• Syntax: <password>,mstatus,[port,]
• Example: 1234,mstatus,
• Example: 1234,mstatus,usb1,
This command returns info about the indicated modem's status. The resulting data reflects the modem model
number, service type, and connection status and values.
Example of response:
Model: MC200P
Service: HSPA+
SIM Status: READY
RSSI: -62 dbm
ECIO: -4
APN: wwan.ccs
IP Addr: 166.136.142.172
mreboot: Reboot the modem*
• Syntax: <password>,mreboot,[port,]
• Example: 1234,mreboot,
• Example: 1234,mreboot,usb1,
© 2013 CRADLEPOINT, INC.
//return status of highest priority modem
//return status of modem plugged into port usb1
//This will reboot the highest priority modem.
//This will reboot the modem on port usb1
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 227