Cradlepoint MBR1400 Product Manual page 211

MBR1400 | USER MANUAL – Firmware version 5.0
CRADLEPOINT
• Any
• ICMP
• TCP
• UDP
• GRE
• ESP
• SCTP
Source IP Address, Source Netmask,
Destination IP Address, and Destination
Netmask: Specify an IP address or range of IP
addresses by combining an IP address with a
netmask for either "source" or "destination" (or
both). Source vs. destination is defined by traffic
flow. Leave these blank to include all IP
addresses (such as if your rule is defined by a
particular port instead).
EXAMPLE: If you want to associate this rule with your
guest LAN, you could input the IP address and
netmask for the guest LAN here (leaving the last slot
"0" to allow for any user attached to the guest
network):
•
Source IP Address: 192.168.10.0
•
Source Netmask: 255.255.255.0
Failover: (Default: Selected.) When this is
selected and traffic from the chosen WAN device for this rule is interrupted, the router will fail over to another available
WAN device. Deselect this option to restrict this traffic to only the selected WAN interface.
WAN Binding Type: You have several options for specifying the type of WAN interface(s) you want associated with your
rule. Designate the interface(s) by Port, Manufacturer, Model, Type, Serial Number, MAC Address, or Unique ID. This
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 209