Cradlepoint MBR1400 Product Manual page 170

MBR1400 | USER MANUAL – Firmware version 5.0
CRADLEPOINT
WAN Configuration Rule
This section allows you to create simple or complex rules
that affect how individual Internet sources or classes of
sources (perhaps all WiMAX modems or all modems from
Sierra Wireless) behave in the router.
After clicking "Add" or "Edit," you will see a popup with the
following tabs:
• Filter Criteria
• General Settings
• Ethernet Settings
• Modem Settings
• WiMAX Settings
• CDMA Settings
• SIM/APN Settings
Filter Criteria. Begin by setting the Filter Criteria if you are
creating a new rule. Create a name for your rule and the
condition for which the rule applies:
Rule Name: Create a name meaningful to you. This name is optional.
Select each of the following to create a condition for your rule. When:
• Port (USB Port 1, 2, 3; ExpressPort 1, 2):
• Manufacturer:
• Model: Set your rule according to the specific model of modem.
• Type (Ethernet, LTE, Modem, WiMAX, Wireless as WAN, HSPA):
• Serial Number:
• MAC Address:
• Unique ID:
router.
© 2013 CRADLEPOINT, INC.
Select by the manufacturer, such as Sierra Wireless.
Select 3G or LTE modem by Serial Number.
Select WiMAX modem by MAC Address.
Select by ID. This is generated by the router and displayed when the device is connected to the
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
Select by the port that you are plugging the modem into.
Select by type of Internet source.
FOR MORE HELP AND RESOURCES PAGE 168