JabloCom GDP – 02 User Manual page 14

JABLOCOM
•
Turn on/off Silent mode: Select this option to turn Silent mode on or off.
•
New message alert: Select this option and use your scroll keys to change your phone's message alert melody (up to 4
melody settings).
•
Date & time: Select this option to adjust the date and time displayed on your phone. Use the numeric keypad to enter the
numbers in the highlighted field, use the scroll keys to select fields.
•
Volume control: Select this option to adjust the handset volume and the speaker phone volume. Press Select and use your
scroll keys to change the Handset volume (up to 9 incremental settings) or the speaker phone volume (up to 9 incremental
settings).
•
Language: Select this option to change the phone's display language—the default language is English. Scroll to the desired
language and press Select.
•
Call settings: Select this option to change your call settings. Scroll to the appropriate function and press Select to change
your:
o Caller ID: Allows you to determine if other people can view your phone number when you call them. Scroll to the desired
option and press Select to: Enable, Disable or Set by network.
Tip: Verify first that your provider enables the hiding of phone numbers before switching this feature on!
o Call divert: Allows you to divert incoming calls to another phone number. Scroll to the desired option and press Select to:
divert All calls [submenu lets you Activate, Cancel, or Check status]; divert calls If (line is) busy [submenu lets you
Activate, Cancel, or Check status]; If no answer on your phone [submenu lets you Activate, Cancel, or Check status];
If (you are) unreachable—your phone is switched off or your phone is not receiving a network signal [submenu lets you
Activate, Cancel, or Check status]; or to Cancel all diverts.
o Call waiting: When this network service is available, the network notifies you of a new incoming call while you are
engaged with another call. Scroll to the desired option and press Select to Activate, Cancel or Check status. If activated,
while you are using the phone to talk to one person, you will hear beeping, which indicates that a new call is coming in. The
new incoming caller's number will be displayed on the LCD panel below the number of the person you are currently
speaking to. Select the "Swap" button on the lower left side of the LCD panel to answer the call waiting or press the "End
active" button on the lower right side of the LCD panel to end the current call.
•
PIN settings:
You can Activate or Deactivate PIN request; the other possibility than the active one is always displayed. Every
o
change requires entering of valid PIN.
You can Change your PIN; after entering the old one you have to enter the new one twice.
o
Note: Some providers do not allow users to switch off the PIN code protection on their SIM cards. In this case, your
phone will require that you enter your PIN code every time you power on your phone.
HB53019_ENG.doc
12
User's Guide
www.jablocom.com