JabloCom GDP – 02 User Manual page 12

JABLOCOM
memory. 1-touch speed dial keys that do not have a stored number display a "Memory empty" message when you press them.
There are two ways to store a number to a memory key:
Storing a New Number 1-touch Key
Follow the instructions below to enter a new phone number into your phonebook (one that is not already in your phonebook):
1. From the standby screen, select one of the 1-touch speed dial keys (for example TEL1) and hold it down until you see:
"Program memory?" displayed. Release the 1-touch hot key and press
2. Enter the phone number and press
3. Enter the person's name and press
number will be stored to the memory key and it will also be automatically written into your phonebook.
4. By pressing the programmed 1-touch key again, the phone will automatically dial the stored phone number in speaker phone
(hands free) mode. Pick up the receiver to use the handset.
Storing a Phonebook Number to a 1-touch Key
Follow the instructions below to enter a number from your phonebook into a 1-touch speed-dialing key.
1. From the standby screen, open your phonebook by pressing the NAMES hot key (
on your LCD panel.
2. Select "Search & Edit".
3. Scroll to the name (for quick scrolling, type the first letter of the person's name on the keyboard) and press
4. Select one of the 1-touch speed dial keys (for example TEL2) and hold it down until you see: "Program memory?" displayed.
Release the 1-touch key and press
5. Now press the programmed 1-touch key, the phone will automatically dial the stored phone number in speaker phone (hands
free) mode. Pick up the receiver to use the handset.
Changing a 1-touch Number
1. Repeat the steps above to write over an existing programmed 1-touch number (In step 4, be sure to select the appropriate
previously programmed speed dial key).
Deleting a 1-touch Number
1.
Deleting a name and number from your phonebook will automatically delete the number from the 1-touch speed dial key (see
"Storing a Number in Your Phonebook" on page 7 for information about deleting phone numbers in your phonebook). After
deleting the number from your phonebook, press the appropriate 1-touch key and a "Memory empty" message will appear on
screen. This means that the number has been deleted and the 1-touch button does not have an assigned number.
2.
You can also press and hold down one of the 1-touch keys until "Program memory?" appears on the screen. Click "Select";
delete the number using the Backspace button ( ), then click "Delete". The number will be deleted from your 1-touch speed
dial keys, but not from your phonebook.
HB53019_ENG.doc
.
. You will see a "Number stored" message on the display confirming the process. The
. You will see a "Number stored" message on the display confirming the process.
10
.
), or by pressing the "Phonebook" key
www.jablocom.com
User's Guide
.