Unitech MS842P User Manual
  1. Manuals
  2. Brands
  3. Unitech Manuals
  4. Barcode Reader
  5. MS842P
  6. User manual

Unitech MS842P User Manual

Wireless 2d scanner
Hide thumbs Also See for MS842P:
Table of Contents

Advertisement

Quick Links

Wireless 2D Scanner
- MS842P -
User's Manual
Version 1.9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS842P and is the answer not in the manual?

Questions and answers

Related Manuals for Unitech MS842P

Summary of Contents for Unitech MS842P

  • Page 1 Wireless 2D Scanner - MS842P - User’s Manual Version 1.9...

  • Page 3: About This Manual

    Preface About This Manual This manual explains how to install, operate and maintain the MS842P wireless scanner. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, such as photocopying, recording, or information storage and retrieval systems, without permission in writing from the manufacturer.

  • Page 4: Regulatory Compliance Statements

    Regulatory Compliance Statements FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications.

  • Page 5: European Conformity Statement

    European Conformity Statement Declaration of Conformity with regards to the R&TTE 1999/5/EC and EMC 89/336/ EEC directives. RoHS Statement This device conforms to RoHS (Reduction Of Hazardous Substances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment.

  • Page 6: Battery Notices

    Battery Notices The MS842P is equipped with a Lithium-Ion battery. The battery will discharge after an extended period of no use. When the battery is discharged, recharge the unit for some 4.5 hours in order to fully charge the battery.

  • Page 7: Warranty

    Warranty The following items covered under the Unitech Limited Warranty are free from defects during normal use: MS842P – 1-year limited warranty. Lithium-Ion battery – 6-month limited warranty. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user.

  • Page 8: Table Of Contents

    Battery charge notice ......................iv Storage and safety notice ....................iv Warranty ..........................v CHAPTER 1 OVERVIEW ..........................1 Introducing the MS842P ....................... 1 Report Version ........................2 Package Contents ......................... 2 CHAPTER 2 BATTERY CHARGING AND CONNECTION ................5 Connecting a USB Interface, Dongle Mode ................
  • Page 9 Memory Buffer Setting ....................... 10 Batch Mode ........................10 Inventory Mode ......................... 11 Buffer Mode Disable ......................13 USB Host Parameters ......................13 USB Device Type ......................13 USB Transmission Speed Parameters ................13 USB Country Keyboard Types - Country Codes ............... 16 Dongle HID Keyboard Language ..................
  • Page 10 Image File Format Selector ....................37 Video View Finder ......................38 Mirrored Image ........................38 Beep After Good Decode ....................38 CHAPTER 4 BAR CODE SYMBOLOGIES ....................40 Introduction ......................... 40 Symbol Code Identifiers ..................... 41 UPC-A ..........................42 Enable/Disable UPC-A ...................... 42 Transmit UPC-A Check Digit .....................
  • Page 11 Bookland EAN ........................50 Enable/Disable Bookland EAN ..................50 Bookland ISBN Format ....................... 50 Decode UPC/EAN/JAN Supplementals ................50 EAN-8/JAN-8........................51 Enable/Disable EAN-8/JAN-8 ................... 51 Code 128 ..........................51 Enable/Disable Code 128 ....................51 Set Lengths for Code 128 ....................51 GS1-128 (formerly UCC/EAN-128) ..................
  • Page 12 Set Lengths for MSI ......................58 Matrix 2 of 5 ......................... 60 Enable/Disable Matrix 2 of 5 ..................... 60 Set Lengths for Matrix 2 of 5 ..................... 60 Inverse 1D ........................... 61 Postal Code Symbologies ....................61 US Postnet ........................61 UK Postal ..........................
  • Page 13 Intercharacter Gap Size ....................70 Macro PDF Features ......................71 Macro PDF Transmit / Decode Mode Symbols ..............71 Transmit Macro PDF Control Header ................72 Escape Characters ......................73 Flush Macro Buffer ......................73 Abort Macro PDF Entry ..................... 73 APPENDIX A SAMPLE BAR CODES ......................
  • Page 14 APPENDIX D WORLDWIDE SUPPORT ......................90...

  • Page 15: Chapter 1 Overview

    With a long life trigger of 10 million times guarantees a continuous productivity for best reliability. MS842P has laser aim is more easier to target barcode to read and it has two engine options for selection DOF: SR (standard range) and HD (high density) for varied applications.

  • Page 16: Report Version

    F/W Version Report Package Contents Please make sure the following contents are in the MS842 package box. If something is missing or damaged, please contact your Unitech representative. Scanner-and-USB dongle package (MS842P) Power adapter USB dongle Wireless 2D scanner...
  • Page 17 Note: The items included in the package may be different, depending on your order. Save the box and packaging material for future use in case you need to store or ship the scanner. When you receive and unpack the package at first time, if any item above is lost, please contact the dealer you bought from, immediately.

  • Page 19: Battery Charging And Connection

    To do the SPP setting, scan the SPP setting bar code. HID Setting To make the scanner return to the HID mode, scan the HID barcode. You can also connect the MS842P scanner optionally to another dongle by following the steps made below.

  • Page 20: Connecting A Usb Interface, Cradle Mode

    PC. Scan the MAC address on the label by using the MS842P scanner. Switch the MS842P off and power on again. When being successfully connected to the dongle, the scanner will beep shortly one time with a high tone.
  • Page 21 3. Plug the AC adapter cord into an electrical outlet.
  • Page 22 MS842P scanner. 5. Insert a USB dongle into the USB port of the cradle. 6. Scan the MAC address on the label by using the MS842P scanner. 7. When being successfully connected to the dongle, the scanner will beep shortly one time with a high tone.

  • Page 23: Led / Beeper Indication For Scanner

    LED / Beeper Indication for Scanner LED Indication for Scanner The LED lights on the MS842P scanner turn on to indicate the status of the battery, a successful read of a barcode, or the status of the wireless connection. MS842P Lights: The status LED turns green, blue, or red to indicate the status of the battery and scanning.

  • Page 24: Memory Buffer Setting

    (* You will hear 3 hi-low long beeps indicating the radio connection lost) Definition of inventory mode In range/out range: All scanned barcode data will be stored in memory storage. Transmit stored data: Scan the "Read Buffer" (change to "send data") to transmit all stored data. (* When the radio link is resumed, the scanner will give one long &...

  • Page 25: Inventory Mode

    If you do not output the barcode data, the barcode data is always kept in the memory buffer. When being outputted, the 1D data is erased from the memory buffer. However, when being outputted, the 2D data is still kept in the memory buffer, and thus if you want to erase the 2D data from the memory buffer, scan the following barcodes in the order.
  • Page 26 data, the scanner will keep the data in its memory buffer until the buffer is full; only when the scanner is within the specified range of the cradle or the host, and you scan the Read Buffer barcode the data will be sent.

  • Page 27: Buffer Mode Disable

    When the buffer is disabled and the scanner is out of range, the scanner will respond with one long beep (low tone) and its LED indicator will become solid red and go off quickly. You are advised to get back to range. Buffer Mode Disable To disable the buffer mode, scan the bar code below.
  • Page 28 Quick Keypad Emulation This option applies only to the HID Keyboard Emulation Device and if Emulate Keypad below is enabled. This parameter enables a quicker method of keypad emulation where ASCII sequences are only sent for ASCII characters not found on the keyboard.
  • Page 29 Emulate Keypad Enable this to send all characters as ASCII sequences over the numeric keypad. For example ASCII A transmits as “ALT make” 0 6 5 “ALT Break”. Dongle HID Keyboard Numeric Keypad Enable Disable Emulate Keypad with Leading Zero Enable this to send character sequences sent over the numeric keypad as ISO characters which have a leading zero.

  • Page 30: Usb Country Keyboard Types - Country Codes

    USB Country Keyboard Types - Country Codes Scan the bar code corresponding to the keyboard type. This setting applies only to the USB HID Keyboard Emulation device. Note: When changing USB country keyboard types the decoder automatically resets and issues the standard startup beep sequences.

  • Page 31: Dongle Hid Keyboard Language

    Dongle HID Keyboard Language US English UK English Swiss Swedish Spanish Italian German French Danish Japanese (OADG109)
  • Page 32 Partial ALT ALT Mode...

  • Page 33: Simulated Caps Lock

    Simulated Caps Lock Enable this to invert upper and lower case characters on the bar code as if the Caps Lock state is enabled on the keyboard. This inversion occurs regardless of the keyboard’s Caps Lock state. Note that this only applies to alpha characters. USB CAPS Lock Override This option applies only to the HID Keyboard Emulation device.

  • Page 34: Function Key Mapping

    Function Key Mapping ASCII values under 32 are normally sent as a control-key sequences. Enable this parameter to send the keys in bold in place of the standard key mapping. Table entries that do not have a bold entry remain the same whether or not you enable this parameter.
  • Page 35 Full ASCII Code 39 Prefix/ Suffix Value Keystroke Encode Char.acter 1022 CTRL V 1023 CTRL W 1024 CTRL X 1025 CTRL Y 1026 CTRL Z 1027 CTRL [/ESC 1028 CTRL \ 1029 CTRL ] 1030 CTRL 6 1031 CTRL - 1032 Space Space...
  • Page 36 Full ASCII Code 39 Prefix/ Suffix Value Keystroke Encode Char.acter 1057 1058 1059 1060 < 1061 1062 > 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087...
  • Page 37 Full ASCII Code 39 Prefix/ Suffix Value Keystroke Encode Char.acter 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124...
  • Page 38 Full ASCII Code 39 Prefix/ Suffix Value Keystroke Encode Char.acter The keystroke in bold transmits only if you enable Function Key Mapping. Otherwise, the unbolded keystroke transmits. USB ALT Key Character Set ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067...
  • Page 39 USB GUI Key Character Set GUI Key Keystroke 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4 3053 GUI 5 3054 GUI 6 3055 GUI 7 3056 GUI 8 3057 GUI 9 3065 GUI A...
  • Page 40 GUI Key Keystroke 3089 GUI Y 3090 GUI Z Note: GUI Shift Keys - The Apple™ iMac keyboard has an apple key on either side of the space bar. Windows-based systems have a GUI key to the left of the left ALT key, and to the right of the right ALT key.
  • Page 41 USB Numeric Keypad Character Set Numeric Keypad Keystroke 6042 6043 6044 undefined 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock USB Extended Keypad Character Set Extended Keypad Keystroke 7001 Break 7002 Delete 7003...

  • Page 42: Dongle Hid Keyboard Character Delay

    Extended Keypad Keystroke 7015 Up Arrow 7016 Down Arrow 7017 Left Arrow 7018 Right Arrow Dongle HID Keyboard Character Delay 1 ms 5 ms 10 ms 20 ms 50 ms 100 ms Dongle HID Keyboard Block Delay 10 ms 50 ms 100 ms...
  • Page 43 500 ms...

  • Page 44: Output Data Editing

    To correct an error or change a selection, scan Cancel. Note: To use Prefix/Suffix values, first set the Scan Data Transmission Format as shown below. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 45: Scan Data Transmission Format

    Note: If using this parameter, do not use ADF rules to set the prefix/suffix. To set values for the prefix and/or suffix, see Prefix/Suffix Values. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 46: Fn1 Substitution Values

    Enter the 4-digit ASCII value by scanning each digit. To correct an error or change the selection, scan Cancel. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 47 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 48: Bar Code Setup Menu

    Enable Parameter Scanning or Set All Defaults. Beeper Volume To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume bar code. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 49: Suppress Power-Up Beeps

    LEDs when the decoder senses motion. A trigger pull activates decode processing. After 2 seconds of inactivity the aiming pattern and internal illumination LEDs automatically shut off. *Standard (Level) Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 50: Low Power Mode

    Low Power Mode. Note: This parameter only applies when Power Mode is set to Low. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 51: Video Mode

    Select an image format appropriate for the system (BMP, TIFF, or JPEG). The decoder stores captured images in the selected format. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 52: Video View Finder

    If selecting Do Not Beep After Good Decode, beeper signals still occur during parameter menu scanning and to indicate error conditions. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 53 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 54: Bar Code Symbologies

    Matrix 2 of 5 Netherlands KIX Code Korean 3 of 5 USPS 4CB/One Code/Intelligent Mail Inverse 1D UPU FICS Postal GS1 DataBar Composite Codes Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 55: Symbol Code Identifiers

    Maxicode US Postnet US Planet Japan Postal UK Postal Netherlands KIX Code Australia Post USPS 4CB/One Code/Intelligent Mail UPU FICS Postal Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 56: Upc-A

    System Character only, transmit System Character and Country Code (“0” for USA), and transmit no preamble. Select the appropriate option to match the host system. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 57: Upc-E

    System Character only, transmit System Character and Country Code (“0” for USA), and transmit no preamble. Select the appropriate option to match the host system. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 58: Code 39

    Scan a bar code below to transmit Code 39 data with or without the check digit. Note: Code 39 Check Digit Verification must be enabled for this parameter to function. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 59: Code 39 Full Ascii Conversion

    Cancel Any Length - Select this option to decode Code 39 symbols containing any number of characters within the decoder’s capability. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 60: Code 93

    Lengths, and then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan the bar code. Cancel Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 61: Code 11

    14 characters, scan Code 11 – One Discrete Length, and then scan 1 followed by 4. To correct an error or to change the selection, scan the Cancel code. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 62: Upc-E1

    To enable or disable UPC-E1, scan the appropriate bar code below. Note: UPC-E1 is not a UCC (Uniform Code Council) approved symbology. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 63: Transmit Upc-E1 Check Digit

    Country Code (“0” for USA), and transmit no preamble. Select the appropriate option to match the host system. EAN-13/JAN-13 Enable/Disable EAN-13/JAN-13 To enable or disable EAN-13/JAN-13, scan the appropriate bar code below. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 64: Bookland Ean

    Bookland ISBN-13 - The decoder reports Bookland data (starting with either 978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13 protocol. Decode UPC/EAN/JAN Supplementals Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 65: Ean-8/Jan-8

    Code 128 - Two Discrete Lengths, and then scan 0, 2, 1, and then 4. To correct an error or change the selection, scan the bar code. Cancel Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 66: Gs1-128 (Formerly Ucc/Ean-128)

    GS1-128 (formerly UCC/EAN-128) Enable/Disable GS1-128 To enable or disable GS1-128, scan the appropriate bar code below. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 67: Isbt 128

    After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Disable this to transmit UPC-E1 decoded data as UPC-E1 data, without conversion. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 68: Convert Code 39 To Code 32

    Trioptic Code 39, scan the appropriate bar code below. Note: You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 69: Discrete 2 Of 5

    To prevent this, select specific lengths (D 2 of 5 - One Discrete Length, Two Discrete Lengths) for D 2 of 5 applications. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 70: Interleaved 2 Of 5

    Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters within the decoder’s capability. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 71: Codabar

    Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan Cancel. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 72: Msi

    MSI - One Discrete Length, and then scan 1 followed by 4. To correct an error or to change the selection, scan the Cancel bar code. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 73 To prevent this, select specific lengths (MSI - One Discrete Length, Two Discrete Lengths) for MSI applications. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 74: Matrix 2 Of 5

    Any Length - Scan this option to decode Matrix 2 of 5 symbols containing any number of characters within the decoder’s capability. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 75: Inverse 1D

    Inverse Autodetect - the decoder decodes both regular and inverse 1D bar codes. Postal Code Symbologies US Postnet To enable or disable US Postnet, scan the appropriate bar code below. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 76: Uk Postal

    DataBar Limited bar code when scanning some UPC symbols that start with the digits “9” and “7”. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 77: Gs1 Databar Expanded

    Note: It may result in erroneous decoding due to Databar Limited and UPC symbologies. GS1 DataBar Expanded Netherlands KIX Code To enable or disable Netherlands KIX Code, scan the appropriate bar code below. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 78: Australia Post

    Note: If you enable this code type, also see the section -- UPC Composite Mode. Composite TLC-39 Scan a bar code below to enable or disable Composite bar codes of type TLC-39. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 79: 2D Symbologies

    Scan a bar code below to enable or disable Code 128 Emulation. Data Matrix To enable or disable Data Matrix, scan the appropriate bar code below. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 80: Data Matrix Inverse

    Never - do not decode Data Matrix bar codes that are mirror images Auto - decode both mirrored and unmirrored Data Matrix bar codes. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 81: Maxicode

    Inverse Only - the decoder decodes inverse QR bar codes only. Inverse Autodetect - the decoder decodes both regular and inverse QR bar codes. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 82: Microqr

    As redundancy levels increase, the decoder’s aggressiveness decreases. Select the redundancy level appropriate for the bar code quality. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 83 8 characters or less Redundancy Level 4 The following code types must be successfully read three times before being decoded: Code Type Code Length Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 84: Security Level

    If this problem occurs, scan the Large Intercharacter Gaps parameter to tolerate these out-of-specification bar codes. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 85: Macro Pdf Features

    Transmit Macro PDF Control Header. Also use the beeper and LED signals provided with the MS842 to ensure proper user feedback. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 86: Transmit Macro Pdf Control Header

    Macro PDF Transmit /Decode Mode Buffer All Symbols / Transmit Macro PDF When Complete. This parameter has no effect when Passthrough All Symbols is selected. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 87: Escape Characters

    Abort Macro PDF Entry This clears all currently-stored Macro PDF data in the buffer without transmission and aborts from Macro PDF mode. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 88: Sample Bar Codes

    Appendix A Sample Bar codes 2D Bar codes Data Matrix Maxicode QR Code PDF417 MicroPDF417 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 89: Us Postnet

    4 7 6 6 9 1 3 7 1 6 UPC-E 1 2 3 4 5 7 Interleave 2 of 5 0987654321 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 90: Code 39

    EAN 128 (01)054123456789(01)659344 Codabar A2 2 3 5 7 0 0 0 5 9 9 8 7 6 B 1234558 GS1 Limited Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 91 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 92: Numeric Bar Codes

    Appendix B Numeric Bar codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 93 Cancel To correct an error or change a selection, scan the bar code below. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

  • Page 94: Ascii Character Sets

    1022 CTRL V 1023 CTRL W 1024 CTRL X 1025 CTRL Y 1026 CTRL Z 1027 CTRL [ 1028 CTRL \ Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 95 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 < 1061 1062 > 1063 1064 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 96 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 ‘ 1097 1098 1099 1100 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 97 1123 1124 1125 1126 The keystroke in bold transmits only if you enabled Function Key Mapping. Otherwise, the unbold keystroke transmits. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 98 2084 ALT T 2085 ALT U 2086 ALT V 2087 ALT W 2088 ALT X 2089 ALT Y 2090 ALT Z Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 99 3082 GUI R 3083 GUI S 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 100 F key Standard Default Table F Keys Keystroke 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 F 10 5011 F 11 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 101 6043 6044 Undefined 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 102 Print Screen 7011 Insert 7012 Home 7013 Enter 7014 Escape 7015 Up Arrow 7016 Dn Arrow 7017 Left Arrow 7018 Right Arrow Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 103 Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
  • Page 104 Unitech’s professional support team is available to quickly answer questions or technical-related issues. Should a set of equipment problem occurs, please contact the nearest Unitech regional service representative. For complete contact information please visit the Web sites listed below: Region...

Table of Contents