Unitech MS842RB User Manual

Wireless 2d imager scanner

Hide thumbs Also See for MS842RB:

Quick start manual (2 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

page of 127

/ 127
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Wireless 2D Imager Scanner

- MS842RB -

User's Manual

Version 1.3

unitech is a registered trademark of unitech Electronics Co., Ltd.

Table of Contents

Need help?

Do you have a question about the MS842RB and is the answer not in the manual?

Questions and answers

Summary of Contents for Unitech MS842RB

Page 2 2017/7/26 Add Radio Type Frequency & Maximum Power 2017/8/14 Update beeper volume & data Terminator 20170904 Update Operation Voltage to 5V © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 3: Preface
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 4 Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 5 MS842RB User’s Manual European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the RED 2014/53/EU directive, the EMC 2014/30/EU directive and the Low Voltage 2014/35/EU directive.
Page 6 MS842RB User’s Manual Waste electrical and electronic equipment (WEEE) unitech has set up a policy and process to meet the EU directive 2002/96/EC and update 2003/108/EC concerning electronic waste disposal. For more detailed information of the electronic waste disposal of the products you have purchased from unitech directly or via unitech’s resellers, you shall either...
Page 7 This equipment complies with the requirements of Directive 2014/53/EU of the European Parliament and Commission from 24 May, 2014 governing Radio and Telecommunications Equipment and mutual recognition of conformity. © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 8 MS842RB User’s Manual Taiwan NCC Warning Statement 低功率電波輻射性電機管理辦法第十二條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。注意事項: 1. 使用過度恐傷害視力。 2. 使用30分鐘請休息10分鐘；2歲以下幼兒不看螢幕，2歲以上每天看螢幕不要超過 1小時。 3. 減少電磁波影響，請妥適使用。 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 9: Laser Information
MS842RB User’s Manual Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The unitech product contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations.
Page 10: Battery Notice
It may not be functional anymore. Please only use the original battery from unitech. Using a third party battery can damage our products. Please note that when such damage occurs, it is not covered by your warranty.
Page 11 If the connector is damaged, please ensure the connector is being fully repaired before use the unit to avoid causing short circuited. © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 12 Please follow the limitation of suggested temperature conditions to avoid failure, damage or malfunction. *For applicable temperature conditions, please refer to the specification of each product. © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 13: Adapter Notice
Please remove the power adapter when the battery is fully recharged. The bundled power adapter that comes with your unitech product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product.
Page 14: Worldwide Support
MS842RB User’s Manual Worldwide Support unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan –...
Page 15: Warranty Policy
The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user.
Page 16: Table Of Contents
3.4 2D......................56 Chapter 4 – Command Settings............62 4.1 System setting..................62 4.2 Un-Pair ....................63 4.3 Output data transmit ................63 4.4 Wireless Config ..................66 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 17 4.6 Scan mode / Parameter Selection............71 4.7 Prefix/Suffix selections .................84 4.8 Data format Selections .................88 Appendix A – Symbology Charts............99 Appendix B – Programming Charts..........109 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 18: Chapter 1 - Overview
MS842RB User’s Manual Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the MS842RB gift box. If something is missing or damaged, please contact your unitech representative. Scanner-only Package Scanner and cradle package  ...
Page 19: Product Detail
MS842RB User’s Manual 1.2 Product Detail ￭ Scanner Detail Scanner LED indicator Scan Window Trigger DC IN jack Power ON/OFF - 2 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 20 Cradle Contact Points for Charge Cradle Foot Cradle address barcode USB/RS232 Socket 10 Reset Pinhole DC Power Socket (5V) Guidance Groove - 3 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 21: Specifications
PDF417, 6.7 mil | 60mm | 125mm Data Matrix, 10 mil | 60mm | 130mm QR, 20 mil | 50mm | 230mm - 4 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 22 1620mAh charged via the cradle Battery Charging time Fully charged in 4 hours Operating Time Over 12 hours - 5 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 23 Regulation Approvals CE, FCC, BSMI, VCCI Radio type / Description Transmitter Frequency Maximum Output Power Bluetooth 2400-2483.5MHz 15dBm - 6 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 24: Getting Started
The aiming beam can be centered over the bar code with any direction and have the proper alignment for a good read. (see example below) - 7 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 25: Battery Charging
MS842RB User’s Manual 1.5 Battery Charging ■ Connect the power supply cable to the bottom of the MS842RB and to an electrical outlet. Charge for at least 4 hours. ■ To charge the scanner without cradle, follow the instructions below: Step 1 : Plug the adapter cable into the power socket on the bottom of scanner.
Page 26 Step 3 : Place the scanner in the cradle.The scanner LED will be red to indicate charging. When the scanner is charged, the LED will turn off. - 9 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 27: Led Indicator / Beeper Sequence
Low tone and Green on to off Short beeps with Hi tone Page calling 5 short beeps with a Hi-Low tone Error / Warning - 10 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 28 Connection Blue LED on Disconnection LED Indication for Cradle Green LED on Power on Green LED off Power off - 11 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 29: Chapter 2 - Installation
3. When the change is successful, the LED indicator of scanner flashes in blue. 4. Make your Host with wireless technology search for the MS842RB scanner. When your Host locates a “HID SCANNER”, select it. 5. The Host should now present a pairing pin and you will be requested to input the pin code at the scanner.
Page 30 “241657”, then scan the barcodes “2” – “4” –“1” –“6” –“5” –“7” listed in the table in the order. - 13 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 31 Note: When scanning a wrong character, scan the “BackSpace” to delete the character one at a time. BackSpace - 14 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 32: Cradle Mode
Switch the power button to the on position. Plug the power supply cable into the MS842RB cradle and into an electrical outlet. Plug the interface cable into the MS842RB cradle. You must also connect it to the USB, RS232 port on your computer.
Page 33: Chapter 3 - Symbology
EXAMPLE: Decode only those bar codes with a count of 15 characters. Min. length = 15Max. length = 15 - 16 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 34 Start/Stop characters identify the leading and trailing ends of the bar code. You may either transmit, or not transmit Start/Stop characters. Default = Don’t Transmit. Transmit Don’t Transmit* - 17 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 35 Minimum and Maximum lengths = 2-60. Minimum Default = 4, Maximum Default = 60. Minimum Message Length Maximum Message Length - 18 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 36 You may either transmit, or not transmit Start/ Stop characters. Default = Don’t Transmit. Transmit Don’t Transmit* - 19 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 37 Minimum and Maximum lengths = 0-48. Minimum Default = 0, Maximum Default = 48. Minimum Message Length Maximum Message Length - 20 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 38 Italian pharmacies. This symbology is also known as PARAF. Note: Trioptic Code must be turned off while scanning Code 32 Pharmaceutical codes. Off * - 21 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 39 Character pairs /M and /N decode as a minus sign and period respectively. Character pairs /P through /Y decode as 0 through 9. Off * - 22 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 40 Default = No Check Digit. No Check Digit* Validate , but Don’t Transmit Validate and Transmit - 23 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 41 Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length - 24 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 42 Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80. Minimum Message Length Maximum Message Length - 25 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 43 Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length - 26 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 44 Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length - 27 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 45 Maximum lengths = 1-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length - 28 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 46 Maximum lengths = 1-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length - 29 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 47 Use the bar codes below to turn concatenation on or off. Default =Off. Off* - 30 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 48 This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. - 31 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 49 Default = Off for both 2 Digit and 5 Digit Addenda. 2 Digit Addenda Off* 2 Digit Addenda On 5 Digit Addenda Off* 5 Digit Addenda On - 32 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 51 When Required is scanned, the scanner will only read UPC-E bar codes that have addenda. Default = Not Required. Not Required * Required - 34 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 52 This feature allows the transmission of a leading zero (0) at the beginning of scanned data. To prevent transmission, scan Off. Default = - 35 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 53 UPC-E0. If you need to read codes that lead with the 1 number system, use the UPC-E1 On selection. Default = Off. Off* - 36 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 54 This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. - 37 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 55 When Required is scanned, the scanner will only read EAN/JAN-13 bar codes that have addenda. Default = Not Required. Not Required* Required - 38 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 56 This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. - 39 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 57 When Required is scanned, the scanner will only read EAN/JAN-8 bar codes that have addenda. Default = Not Required. Not Required* Required - 40 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 58 When turned Off, there is no space. Default = On. 3.3.15 MSI MSI On Default All MSI Settings MSI Off * - 41 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 59 3.3.17 GS1 DataBar Limited GS1 DataBar Limited On* Default All GS1 DataBar Limited Settings GS1 DataBar Limited Off - 42 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 60 Minimum Message Length Maximum Message Length 3.3.19 PDF 417 PDF 417 On* Default All PDF 417 Settings PDF 417 Off - 43 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 61 Minimum Message Length Maximum Message Length 3.3.20 QR Code QR Code On* Default All QR Code Settings QR Code Off - 44 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 62 Maximum lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116. Minimum Message Length Maximum Message Length - 45 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 63 Maximum lengths = 1-150. Minimum Default = 1, Maximum Default = 150.. Minimum Message Length Maximum Message Length - 46 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 64 Maximum lengths = 1-7833. Minimum Default = 1, Maximum Default = 7833. Minimum Message Length Maximum Message Length - 47 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 65 NEC 2 of 5 bar codes printed with a check digit, and will transmit this digit at the end of the scanned data. Default = No Check Digit. No Check Digit* - 48 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 66 Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length - 49 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 67 Minimum and Maximum lengths = 1-80. Minimum Default = 1, Maximum Default = 80. Minimum Message Length Maximum Message Length - 50 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 68 Minimum and Maximum lengths = 1-600. Minimum Default = 1, Maximum Default = 600. Minimum Message Length Maximum Message Length - 51 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 70 Maximum lengths = 1-366. Minimum Default = 1, Maximum Default = 366. Minimum Message Length Maximum Message Length - 53 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 71 Maximum lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435. Minimum Message Length Maximum Message Length - 54 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 72 Maximum lengths = 1-3832. Minimum Default = 1, Maximum Default = 3832. Minimum Message Length Maximum Message Length - 55 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 73 British Post On Canadian Post On Intelligent Mail Bar Code On Japanese Post On KIX Post On Planet Code On - 56 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 74 B’ Fields On Postnet and Postal-4i On Planet Code and Postal-4i On Postal-4i and Intelligent Mail Bar Code On - 57 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 75 Code, and Postnet with B and B’ Fields On Planet Code and Postnet with B and B’ Fields On - 58 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 76 Intelligent Mail Bar Code On Planet Code, Intelligent Mail Bar Code, and Postnet with B and B’ Fields On - 59 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 77 Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length - 60 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 78 Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length - 61 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 79: Chapter 4 - Command Settings
Show Decoder Revision 4.1.4 Setting Bar Codes Enable/Disable Scan the bar code below to Enable / Disable barcodes. Enable* Disable - 62 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 80: Un-Pair
4.3.1.1 Erase last memory entry Scan below bar code to erase last scanned data in memory Erased Last Memory Entry - 63 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 81 Batch mode 4.3.3.1 Send batch Scan below bar code to send the stored data to host Send Batch - 64 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 82 Erase 4.3.3.4 Free batch memory space Scan below bar code to check batch memory space Check Memory Space - 65 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 83: Wireless Config
Scan below bar code to set the block delay time. 10 ms 50 ms 100 ms 500 ms 1 Sec. 3 Sec. - 66 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 84 ‘’to lower” barcode to output data in lower case; or scan “to upper” barcode to output data in upper case. Auto Trace * To Upper To Lower - 67 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 85 US English UK English Swiss Swedish Norwegian Italian German French Danish Partial ALT Japanese (OADG109) Spanish ALT Mode - 68 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 86: Beep & Vibration
4.5.1.1 Good Read Beep on Good Read (Toggle) 4.5.1.2 Connection Status Beep on Connection Change ( Toggle ) - 69 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 88: Scan Mode / Parameter Selection
LEDs need to be so the scan engine can “see” the bar codes. High* Medium - 71 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 89 Note: LED Illumination - Presentation Mode does not apply to Poor Quality PDF Codes or Mobile Phone Read Mode. High * - 72 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 90 Top of Centering Window and Bottom of Centering Window bar codes. - 73 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 91 Note: A bar code needs only to be touched by the centering window in order to be read. It does not need to pass completely through the centering window. - 74 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 92 Top of Presentation Centering Window Bottom of Presentation Centering Window Left of Presentation Centering Window Right of Presentation Centering Window - 75 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 93 This setting does not affect 1D bar code reading. Default = Poor Quality PDF Reading Off. Poor Quality PDF Reading Off* Poor Quality PDF Reading On - 76 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 94 Time-Out bar code, then scan the time-out duration (from 0-300,000 milliseconds) from the inside back cover, and Save. Default = 5,000 ms. Hands Free Time-Out - 77 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 95 Presentation Mode. Default = Medium. Short (500 ms) Medium (750 ms)* Long (1000 ms) Extra Long (2000 ms) - 78 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 96 Reread Delay is used for both 1D and 2D bar codes. Default = 2D Reread Delay Off. 2D Reread Delay Off* Short (1000ms) Medium (2000ms) Long (3000ms) Extra Long (4000ms) - 79 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 97 This feature allows you to turn the aimer on and off. When the Interlaced bar code is scanned, the aimer is interlaced with the illumination LEDs. Default = Interlaced. Interlaced* - 80 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 98 (see Data Formatting ). The hex code for the No Read symbol is 9C. Off* - 81 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 99 Note: Images downloaded from the unit are not reversed. This is a setting for decoding only. Video Reverse Off * Video Reverse and Standard Bar Codes Video Reverse Only - 82 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 100 When CodeGate is Off, bar code data is transmitted when it is decoded. Default = CodeGate Off Out-of-Stand. CodeGate Off Out-of-Stand * CodeGate On Out-of-Stand - 83 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 101: Prefix/Suffix Selections
ASCII Conversion Chart (Code Page 1252). Scan Save, or scan Discard to exit without saving. - 84 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 102 Step 3. Scan the 2 digit hex value from the Programming Chart or scan 9, 9 for all symbologies. Your change is automatically saved. - 85 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 103 Add Prefix Clear All Prefixes Clear One Prefix Suffix Selections Add Suffix Clear One Suffix Clear All Suffixes - 86 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 104 Add Code I.D. Prefix toAll Symbologies (Temporary) Data Terminator None * CRLF - 87 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 105: Data Format Selections
Default Data Format code below. Default Data Format * - 88 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 106 10 is the number of characters to send 0D is the hex value for a CR The data is output as: 1234567890 - 89 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 107 44 is the hex value for a 'D” 0D is the hex value for a CR The data is output as: 1234567890ABC <CR> - 90 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 108 (00-99) for the number of times it should be sent. Refer to the ASCII Conversion Chart (Code Page 1252), for decimal, hex and character codes. - 91 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 109 0002 is the length of the string to be added (2 characters) 2A is the hex value for an asterisk (*) - 92 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 110 01 is the number of times the space character is sent F1 is the “Send all characters” command 0D is the hex value for a CR - 93 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 111 B503001F00320030F833. Note: Key modifiers can be added together when needed. Example: Control Left+Shift Left = 11. - 94 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 112 If you wish to process this type of bar code without generating an error tone, see Primary/Alternate Data Formats. - 95 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 113 Data Formatter On, Not Required, Keep Prefix/Suffix * Data Formatter On, Not Required, Drop Prefix/Suffix Data Format Required, Keep Prefix/Suffix Data Format Required, Drop Prefix/Suffix - 96 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 114 1, 2, and 3. To set your device to use one of these formats, scan one of the bar codes below. Primary Data Format Data Format 1 Data Format 2 Data Format 3 - 97 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 115 Code I.D. prefix for all symbologies. This is a temporary setting that will be removed when the unit is power cycled. Add Code I.D. Prefix toAll Symbologies (Temporary) - 98 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 116: Appendix A - Symbology Charts
Refer to Data Editing and Data Formatting for information about using Code ID and AIM ID. Linear Symbologies - 99 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 118 This table applies to U.S. style keyboards. Certain characters may differ depending on your Country Code/PC regional settings. - 101 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 119 If this is the case, select the code page with which the bar codes were created. The data characters should then appear properly. - 102 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 121 MS842RB User’s Manual Full ASCII Chart (Characters in parentheses represent Code 39 barcode printing) - 104 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 126: Appendix B - Programming Charts
MS842RB User’s Manual Appendix B – Programming Charts - 109 - © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.

Unitech MS842RB User Manual

Preface

Chapter 1 - Overview

Chapter 2 - Installation

Chapter 3 - Symbology

Chapter 4 - Command Settings

Appendix A - Symbology Charts

Appendix B - Programming Charts

Quick Links

Need help?

Questions and answers

Related Manuals for Unitech MS842RB

Summary of Contents for Unitech MS842RB

Table of Contents