Aiwa XR-MD510 Service Manual page 89

Md / cd stereo system
Hide thumbs Also See for XR-MD510:
Table of Contents

Advertisement

9. About Indication
The state of circuit, selected disk or switch can be checked on the display.
Function
1
Laser power
2
Disk type
3
REC PROTECT SW
4
REFLECT SW
5
INSIDE LIMIT SW
1 LASER POWER
2 DISC TYPE
10.
Checking the Servo Operation
10-1.
Checking the Focus Search and Spindle Kick 1 (checking the S-curve)
1)
When the RANDOM/REPEAT button of the remote controller is pressed in the "ALL SV OFF" state, the focus search operation
and spindle kick are performed at the same time. Then "FOCUS CHECK" is displayed.
These operations are repeated regardless of whether a disk is installed. Therefore, the S-curve can be checked with the disk
installed.
2)
After checking, press the STOP button to return the display to "ALL SV OFF".
10-2.
Checking the Focus Search and Spindle Kick 2
1)
When the PLAY button is pressed in the "ALL SV OFF" state without any disk, the search operation and spindle kick are
performed at the same time. Then "FOCUS SRCH" is displayed.
2)
After checking, press the STOP button to return the display to "ALL SV OFF".
10-3.
Checking the Focus Servo
1)
Insert a disk.
2)
Press the MD MODE button and set the servo mode according to the inserted disk as shown below.
MO disk: " SELECT GRV" appears and "TIMEMARK" lights.
PIT disk: " SELECT PIT" appears and "AUTOMARK" lights.
3)
Press the PLAY button.
If the focus servo is normal, " FOCUS SRCH" appears and "FOCUS ON!" appears.
4)
After checking, press the STOP button to return the display to "ALL SV OFF".
10-4.
Checking the All Servo ON
1)
When the ENTER button is pressed during focus servo off, the tracking sled servo is turned on and all servos run.
If the servos are all normal, "ALL SV ON" is displayed.
2)
After checking, press the STOP button to return the display to "ALL SV OFF".
Indication
pict indication
LA READ-1/2-WRITET
T-BASS
SELECT GRV
TIME MARK
SELECT PIT
AUTO MARK
ROCK frame
POP frame
JAZZ frame
When pict lights
Displayed using the three-step level meter
MO disk (for recording and playback)
PIT disk (for playback)
REC is possible.
PIT disk
Switch ON (innermost circumference)
3 REC PROTECT SW
4 REFLECT SW
5 INSIDE LIMIT SW
22
When pict glights off
REC protection
MO disc
Switch OFF

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xr-md511

Table of Contents