Dry Ironing; Steam Ironing - Sunbeam GCSBBV-39X Series Owner's Manual

GCSBBV-39X Series_12ESM1.indd 10-11
TO FILL THE WATER RESERVOIR (use tap water)
1. Set the Steam Dial to (Dry) and the Fabric Select Dial to MIN.
Make sure the iron is unplugged.
2. Fill an easy-pour measuring cup with tap water and pour water into
iron water reservoir. Do not fill water reservoir beyond maximum fill
level.
WARNING: To prevent the risk of burns, be careful when filling a hot
iron with water. Hot metal parts, hot water and steam can cause injuries.

DRY IRONING

1. Make sure the Steam Dial is turned to the
2. Plug the cord into a 120-Volt AC outlet.
3. Turn the large Fabric Select Dial to the fabric setting you desire. Allow
the iron to heat for 2 minutes. While the iron is heating, make sure it
is sitting on its heel rest on a stable, protected surface.
NOTE: While the Steam Dial is turned to the
still use the SPRAY MIST feature, as long as the Fabric Select Dial is
®
set to wool, cotton, or linen. Please make sure the water reservoir is
approximately ¼ full of water.

STEAM IRONING

1. Follow the instructions for "Filling the Water Reservoir."
2. Plug the cord into a 120-Volt AC outlet.
3. Turn the Fabric Select Dial to the fabric setting you desire. Allow the
iron to heat for 2 minutes. While the iron is heating, make sure it is
sitting on its heel rest on a stable, protected surface.
IMPORTANT: When not ironing, always set the Steam Lever to
and the Fabric Select Dial to MIN.
(Dry) setting.
(Dry) setting, you may
(Dry)
-E5-
7/11/12 11:38 PM