Important Safeguards - Sunbeam GCSBBV-39X Series Owner's Manual

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should
always be followed including the following:
READ ALL INSTRUCTIONS BEFORE USE.
1. Only use an iron for its intended use.
2. To avoid the risk of electric shock, do not immerse the iron in water
or other liquids.
3. Always turn the iron to "Off" before plugging or unplugging the iron
from the electrical outlet. Never pull on the cord to disconnect the
iron from the electrical outlet; instead, grasp the plug and pull on the
plug to disconnect the iron.
4. Do not let the cord touch hot surfaces. Let the iron cool completely
before putting the iron away. Coil the cord loosely around the iron
when storing.
5. Always disconnect the iron from the electrical outlet before filling the
iron with water, emptying the water from the iron, and when the
iron is not in use.
6. Do not operate the iron with a damaged cord or in the event the
iron has been dropped or damaged. To avoid the risk of electric
shock, do not disassemble or attempt to repair the iron. Take it
to a qualified service center for examination and repair. Incorrect
assembly or repair might result in a risk of electric shock, a risk of fire
or injury to person when the iron is used after reassembly or repair.
7. Close supervision is required for any appliance used by or near
children. Do not leave the iron unattended while the iron is
connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a STEAM IRON upside down – there
might be hot water in the reservoir.
9. In the event the iron is not operating properly, disconnect the iron
from the electrical outlet and have the iron serviced by qualified
service personnel.
10. This iron must not be left unattended while it is connected to the
supply mains.
11. The iron must be used and rested on a stable surface.
GCSBBV-39X Series_12ESM1.indd 4-5
-E2-
7/11/12 11:38 PM