Using The Air Compressor - Duracell Powerpack Pro 300 Owner's Manual

Hide thumbs Also See for Powerpack Pro 300:
Table of Contents

Advertisement

► Using the air compressor

WARNING: Fire hazard
The compressor is designed for short term operation
only. Operating the compressor over an extended period
of time will cause the compressor unit to overheat which
could lead to fi re. Allow the compressor to cool down
for 10 minutes after each 10 minutes of continuous
operation.
WARNING: Risk of personal injury or damage
to equipment
Never leave the compressor unattended while in
operation. Keep out of reach of children. The compressor
is capable of infl ating to 150 PSI. Do not exceed the
recommended pressure of either the compressor or the
object being infl ated. If either recommended pressure is
exceeded, an explosion may result.
Infl ating tires
CAUTION
If the pressure gauge on the compressor indicates more
than twice the recommended pressure for the object you are
infl ating, and you have only started to infl ate the object, the
valve connector is incorrectly connected to the valve stem.
This may damage the Duracell
and reattach the valve connector to the valve stem.
To infl ate your vehicle, motorcycle, or bicycle tires:
1. Place the valve connector securely on the tire valve
stem, push it as far as possible to allow normal airfl ow,
and close the thumb latch. If necessary, use a supplied
nozzle adapter.
2. Turn the compressor on, and infl ate your tire to the
recommended pressure. Use Table 3-3 as a guide only.
3. Turn the compressor off after appropriate pressure is
reached.
®
Powerpack Pro. Remove
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerpack pro 600

Table of Contents