Using The Built-In Light; Using The Usb Ports - Duracell Powerpack Pro 300 Owner's Manual

Using the built-in light

EMERGENCY LIGHT

Using the USB ports

The dual USB ports provide up to 2.4 Amps of combined
power to charge cell phones, smartphones, iPhones and
iPads and other tablets. The ports can charge two devices
simultaneously.
To charge USB devices:
Connect your USB device (smartphone, tablet, etc.) to a
USB port using the USB cable supplied with your device,
then push the "USB On/Off" button. Charging will start and
up to 2.4 Amps of current can be supplied by the port(s).
The USB device controls the amount of current supplied.
The Powerpack Pro never "pushes" more than required by
the devices. Push the "On/Off" button when done.
Note: Please refer to the "User Reference" section on
Page 25 for examples of typical USB device charging
using the Powerpack Pro.
®
The Duracell
built-in light to illuminate a room in an
emergency, or to provide a safe, bright
work light on the roadside and in other
outdoor environments. This light can
be rotated up and down to focus the
illumination where it is needed.
To use the built-in light, fi rst push the
"Emergency Light" button to turn on the
LED bulb, then gently swivel the lens up
and down to aim the light beam. After
use, push the "Emergency Light" button
again to turn off the light.
9
Powerpack Pro has a