Setup Menu; General Setup Menu; Locking/Unlocking The Disc For Viewing; Dimming Player's Display Panel - Yamaha DVD-S550 Owner's Manual

Setup Menu

This DVD Player setup is carried out via
the TV, enabling you to customise the
DVD Player to suit your particular
requirements.

General Setup menu

1
In disc mode, press ON SCREEN.
2
Press 1 2 to select 'General Setup' icon.
3
Press ENTER/OK to confirm.
- - GENERAL SETUP PAGE - -
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the disc
maker. You can prevent a specific disc
from playing by locking the disc. Up to 40
discs can be locked.
1
In 'GENERAL SETUP PAGE', press 34 to
highlight {DISC LOCK}, then press 2.
LOCK
Select this to block the playback of the
current disc. Subsequent access to a
locked disc requires six-digit password.
The default password is
page @@"Changing the password").
UNLOCK
Select this to unlock the disc and allow
future playback.
2
Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
TIPS: To return to the previous menu, press 1.
To remove the menu, press ON SCREEN.
16
'000 000' (see

Dimming player's display panel

You can select different levels of
brightness for the display screen.
1
In 'GENERAL SETUP PAGE', press 34 to
highlight {DISPLAY DIM}, then press 2.
• 100% – Select this for full brightness.
• 70% – Select this for medium
brightness.
• 40% – Select this for dimming the
display.
2
Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Programming disc tracks (not for
Picture CD/MP3)
You can play the contents of the disc in the
order you want by programming the tracks
to be played. Up to 20 tracks can be
stored.
1
In 'GENERAL SETUP PAGE', press 34 to
highlight {PROGRAM}, then press 2 to
select {INPUT MENU}.
2
Press ENTER/OK to confirm.
Program : Track (01 - 17)
01 04
01 10
03 11
04 __
05 __
EXIT
To input your favourite tracks/chapter
3
Use the numeric keypad (0-9) to enter
a valid track/chapter number.
4
Use 1 234 to move the cursor to the
next position.
➜
If the track number is more than ten,
press T to open the next page and
proceed with programming or,
➜
Use 1 234 to highlight {NEXT} on the
programme menu, then press ENTER/
OK.
01 __
01 __
03 __
04 __
05 __
START NEXT