Discovering Devices In Windows Network - Conceptronic C8CHIPSKIT User Manual

Step 3
The selected NVR may have been assigned a valid IP address via DHCP server. It can also be manually given
an IP address. To do so, click on "Set IP" button. In the pop-up "Set IP" window, input the IP, Subnet Mask and
Gateway. Input account info if NVR is password protected
Step 4
Click on the "Browse" button. This will launch an IE browser and link to the NVR web page immediately.

Discovering devices in Windows Network

The NVR can be discovered in "Windows Network" of a client PC when it is connected in a network with DHCP
and UPnP services available. See the figure below.
Right-click on the device and select "Properties", the pop-up window shows all the information related to the
device, including the web access info. Use the web address to connect to the NVR. Or simply double-click on
the selected device, which gets immediately access to the NVR webpage.
35