Conceptronic C8CHCCTVKITP Quick Start Manual

Hide thumbs Also See for C8CHCCTVKITP:

Advertisement

Quick Links

Part One: Basic Operation ...................................................................................... 2
1. Basic installation .......................................................................................... 2
2. Startup ......................................................................................................... 2
3. Turn off ........................................................................................................ 2
4. Login ............................................................................................................ 2
5. Preview ........................................................................................................ 3
6. Recording Config.......................................................................................... 3
7. Playback ....................................................................................................... 5
8. Network ....................................................................................................... 6
9. Alarm ........................................................................................................... 6
10. PTZ Control ................................................................................................ 7
Part two: Remote Control ........................................................................................... 7
1. Remote Control ........................................................................................... 7
2.Multi-device manage platform software - CMS .......................................... 7
3. Web Monitor ............................................................................................... 8
4.Access device in public network (Cloud operation) ................................... 10
5 Mobile Monitor .......................................................................................... 14
1 / 16
HD DVR Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C8CHCCTVKITP and is the answer not in the manual?

Questions and answers

Summary of Contents for Conceptronic C8CHCCTVKITP

  • Page 1: Table Of Contents

    HD DVR Quick Start Guide Part One: Basic Operation ..................2 1. Basic installation ..................2 2. Startup ......................2 3. Turn off ......................2 4. Login ......................2 5. Preview ......................3 6. Recording Config..................3 7. Playback ....................... 5 8.
  • Page 2: Part One: Basic Operation

    Part One: Basic Operation 1. Basic installation 1.1 HDD installation Please install the hard disk before using this product for the first time. Ensure correct connection of the power cable and data cable of the HDD. This product can support either one or two HDDs, depending on the model purchased.
  • Page 3: Preview

    Pic 1 : Login Password protection: if the password is entered incorrectly three times, the alarm will start. If the password is entered incorrectly five times, the account will be locked. (Through reboot or after half an hour, the account will be unlocked automatically). For safety’s sake, please revise user name and password regularly.
  • Page 4 Pic 2 Recording Config 【Channel】Choose the corresponding channel number to set the channel. Choose the “all” option to set the entire number of channels. 【Redundancy】Choose the recording file and backup in two hard disks. One is the read-write disk, the other is the redundant disk. (refer to 4.5.1 in reference CD) 【Length】Set the time length of each video file.
  • Page 5: Playback

    7. Playback There are two methods for you to play the video files recorded on the hard disk. 1. In the desktop shortcut menu. 2. Main Menu>Record>Playback. Enter the playback interface – the device allows playback of multiple channels at the same time.
  • Page 6: Network

    8. Network Doing network setup through [Main Menu]>[System]>[Network] 【IP address】Set the IP address. Default: 192.168.1.10. 【Subnet Mask】Set the subnet mask code. Default: 255.255.255.0. 【Gateway】Set the default gateway. Default: 192.168.1.1. Pic 5: Network setting Set up the equipment’s IP address and the router in the same network segment. For example, the router IP address is 192.168.1.1, and the subnet mask is 255.255.255.0.
  • Page 7: Ptz Control

    Motion detection setup. Set DVR equipment to activate an alarm, linkage record and make the PTZ return to the preset position when there is a moving object detected in a designated area between Monday and Friday. Step1. Choose【Main Menu】>【Alarm】>【Motion Detect】,then enter the setup interface. Step2.
  • Page 8: Web Monitor

    device interface” by clicking 【System】 > 【Device Manager】 > 【Add zone/device】 , enter the device adding interface, follow the tips to input DVR information, then exit after saving. Step 3: repeat the above steps on the interface of Device Manager, where the user can add multi devices for centralized management.
  • Page 9 Pic.8 WEB login interface Step 3: Log in, inputting user name and password. If you choose to link with all the videos after login, you will need to choose network stream; for a LAN use main stream to transfer, for a WAN use the extra stream to transfer.
  • Page 10: Access Device In Public Network (Cloud Operation)

    3.1Basic remote control operation To do remote control at the interface of pic 9 3.2 Screen Split To choose the mode of preview 3.3 Playback Enter playback area, can support multi-channel playback at the same time. 3.4 Log Show log information 3.5 Local config To set device alarm, enable linkage function on the remote network client side.
  • Page 11  Log in by user Customers using their registered user name and password to log in will see below Interface. Pic 5.3 cloud technology operation interface Device manage Mainly used to add a device, click “add” to input the serial number of device to be monitored. 11 / 16...
  • Page 12 Pic 5.4 device manage interface Pic 5.5 add interface at device manage : Note in pic 5.5, the user name means the user name of monitored device, password means the password of related user. My Device Mainly shows all the added devices. Click the on-line device name, providing access to control this device accordingly.
  • Page 13  Log in by device Pic 5.7 interface of log in by device Input the serial number of device and the verify code to monitor and control the device directly. Pic: 5.8 monitor page - log in by device 13 / 16...
  • Page 14: Mobile Monitor

    5 Mobile Monitor Introduces extra stream techniques when mobile monitoring, support channels switch (eg. Windows mobile) Step 1. DVR config, go to [Main Menu]->[System]->[Encode], enable Extra Stream. Step 2. install mobile monitor software to cellphone, get the software from CD enclosed, (the software for android mobile is XMEye.apk ) Note: iPhone mobile monitoring software: use mobile to search "...
  • Page 15 (Add device successfully) Step 5: click “OK” to return to device list, and click one device name to enter preview interface. Pic:14 mobile monitor interface Note: when the DVR is in a LAN, the mobile should connect to a wireless router to access the device. 15 / 16...
  • Page 16 16 / 16...

This manual is also suitable for:

C4chcctvkitC4chcctvkitmC4chcctvkitdC8chcctvkitd

Table of Contents