CONTENTS Chapter one Products Introduce ........4 1.1 Technical Parameter ............4 1.2 Product overview ..............4 1.3 Key Features ..............4 Chapter Two Hardware ..........5 2.1 H.264 standalone DVR ............5 Chapter Three Operation ..........8 3.1 Operation instruction ............8 3.2 Power On ................
Page 3
4.3 Network Setup ..............19 4.4 System Setup ..............22 4.5 System Management ............24 Chapter Five IE Preview ..........26 logging on interface ............26 5.2 System Settings ..............27 5.3 Status control ..............28 Chapter Six QMEYE phone software for use ....30 6.1 Instructions of Android ............
Page 4
Power This DVR adaptor is DC12V; please make sure the power supply voltage before turn on the machine. If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket; 2.
1.2 Product overview The Conceptronic CCTV Surveillance Kit offers an ideal way to securely monitor a house or business. With four cameras focused on different areas, all access points to the front, rear and sides of the property will be covered.
Chapter Two Hardware 2.1 H.264 standalone DVR 2.1.1 Hard disk Installation For the first use, please install the hard disk ○ 1 Remove the screws on both ○ 2 extracted from the next cover up ○ 3 connect the data wire ○...
Rear panel Item Interface Description VIDEO IN 8ch video input AUDIO IN 8ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor 6 HD-OUT HDMI interface 7 NETWORK RJ45 8 First USB for backup or upgrade system of DVR; Second USB for mouse 9...
Page 8
4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm device should be need Vcc;...
Chapter Three Operation 3.1 Operation instruction 3.1.1 Remote control AND Front panel keypad Table: KEYpad Operating Operating Keypad instruction instruction Name Name This button is used 【POWER】 【 ENTER 】 Power ON/OFF as“enter”and“ok” key in most 【OK】 circumstances 【MENU】 Access main menu Exit operation or enter upper menu Close soft keyboard...
to move in the PTZ control windows 【REC】 【CLEAR】 To mode of recording Clear alarm Search playback time 【SEARCH】 choosing 3.1.2 How to use mouse of DVR (for right hand mouse) To any function menu icon click the mouse left key into the menu To run the control point out operation Change again select frame or motion detection piece mode Click the assemble frame popping to pull down the list...
Button Description Button Description Main Menu PTZ control Wizard language Alarm control Multi channel Display setup Recording Control Exit Playback Back up If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk connection! Note: In this dialog you can select language and quickly set various of parameters.
recording). Directly to pull up the power cable of DVR While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it. (specially while the DVR recording). Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operation, the DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply.
3.7 Playback video Button Description Button Description Synchronous/asynchronous play Voice adjustment frame by frame 1/4/8/9screen(switch image) Speed slow Hide / display list Speed normal recording date Speed fast Play/pause/stop Sound off/on rewind Note: 1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc. information in the Playback control panel; 2) Can’t same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel;...
3.8 How to control PTZ 【Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control. 【Focus】Slight adjusting the focal length 【Iris】Aperture size adjustment 【Speed】Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step length of turning the faster yuntai. 【Preset】Adjust the camera Angle, then direction and the corresponding input and clicking on [ set] button, preset dots to set the dots in the preset rastelli.
3.9 Alarm control 【Set Alarm】Selection need protection channel, click confirm corresponding channel after in protection status 【Clear Alarm】Remove protection condition, not alarm input to react 【Alarm Output】Open the alarm output.In the premise of no trigger alarm input,user can operate the output.for example, some alarm switch is connected with a lamp,lamp is open when alarm is trigered 【All】Can choose all the channels 3.10 Display Adjust...
Page 16
【Device】The first generation of DVR’s optional: VGA output, TV output etc display output devices, the system may support multiple equipment and output. The second generation of DVR’s optional:VGA Output+HDMI Output、TV Output. 【Resolution】Setting the resolution of the display device. The first generation of DVR default VGA resolution is 1024 x 768; The second generation of DVR default VGA resolution is 1280 x 1024;...
Chapter Four Menu Operation Guide 4.1 Recording Setup (1) Recording Setup 【Channel】Choose the need to install passage "whole" says setting all channels. 【Image Size】CIF/HALF D1/D1,if the model is 960H,the encoding format maybe is 960H/D1/CIF,if the model is 1080P,the encoding format maybe is 1080P/720P, different models,different encoding format 【Encoding Mode】Including fixed bitrate, dynamic bitrate.
【Channel】Choose the need to install passage "whole" says setting all channels. 【Channel Name】Can manual corresponding input channel's name 【Channel Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle and downward, upper, right, and lower. 【Time Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle and downward, upper, right, and lower.
Page 19
【Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system can take effect. 【Channel】Choose to set the video Settings area passage "whole" says setting all channels 【Reserved Section】Click Settings enter. The white areas for privacy area 【Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning 【Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output (3)Motion Detection...
【Time】 Interval time from 5s to 255s 【Full page】 select channel to switch 【Quad page】Quad mode. 4.3 Network Setup (1)General Setup 【DHCP】After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS server, etc 【UPnP】Can choose according to the requirement 【IP Address】Network logic address can according to the requirements set 【Subnet Mask】Server subnet mask 【Default Gateway】Server gateway...
Page 21
Manual Dialing In the interface of following picture, users would fill the right information in the menu bar as same as Automatic dialing and click “SAVE”. Then click “Dial-up” after saving successfully (The referred information would be saved still after the DVR restart, but you should click “Dial-up”...
Page 22
【SSL Protocol】Sending E-mail in use safety network connection 【Test Email】Send an email to the recipient mailbox test 【Email Address】The recipient's email address. Users can input two different email address. 【Send Email】The sender email address . 【SMTP Server】Send mailbox mail server 【Email Account】The sender email address the corresponding account 【Email Password】The sender email address of the corresponding email password According to the customer request can be checked 【Video Setup 】and 【...
【Starting IP】Display IP address started section 【Ending IP】Display IP address end segments 【Add】On the basis of the need for added 【Delete】According to the need to delete 4.4 System Setup (1)Time 【System Language】Used in a remote remote device control more hard disk video recorder occasions, only in remote controls address and hard disk video recorder Numbers identical to remote operation.
Page 24
【User】Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The user has the largest number of eight, user name may not be repeated. 【User Rights】According to the requirements set of functions need checked 【Add User】Input need to add user, and input the account password and passwords.
【Buzzer Output】In the chosen time intervals have alarm input will start buzzer output. 【Send Email】In the chosen time intervals have alarm input which will send relevant information, such as the alarm events, paparazzi pictures, equipment name, device ID, etc sent to user specifies the mailbox. 【Alarm Output】In the chosen time intervals have alarm input will start alarm output (6)Margin Adjust By the function, you can adjust the distance between the display device and the picture edge.
Page 26
(2)Log Search 【Date Search】Can search according to date 【Log Type】Optional: all, operation log, set diaries, alarm log, error log Note : according to the left, right arrow can move forward and content. (3)Online Users Display the users who are visiting the DVR. (4)Exception Handling 【Exception Type】Choose abnormalities: hard disk full, hard disk errors, network connection.
Restoring default can restore selected according to need. The system restore to the default configuration state out, can according to the menu options choose to restore the corresponding Settings. : menu color, language, time date format, video format, IP address, the user account, etc will not be restored. Chapter Five IE Preview logging on interface To input the IP address...
5.3 Status control In state control you can set reboot server, close server , remote to go up Remote upgrade: let PC file load in the system Log: to inquire sometime the server’s action...
QMEYE phone software for use Chapter Six This cloud service platform is the best mobile phone video during the internet era. It consists of front-end acquisition devices, platform servers, and remote view of three parts. 1) The acquisition of client software: The client software can be got from the CD material equipped with CD, then choose English and select the options supporting tools, finally choose the mobile phone monitoring or obtained from technical support.
Page 32
will be program icons after finishing installing. 6.1.3 Login interface 6.1.3.1 Login interface Open the software into the login interface, inputting the username and password and click button “login”, then it will be login the application. Icon description: icon Function description After select, it will go directly to the main menu when you log in again.
Page 33
6.1.3.3 Retrieve the password On the register clicking the button “login” and jump to “retrieve password” interface. Input the username, click button “retrieve password”. If you have entered your name and email address when registering and the username has been occupied, then “retrieve password” information will be sent to the email address.
Page 34
Button instruction: icons function instruction return to main menu move to the left move to the right move down move up enlarge narrow zoom out zoom in aperture enlarge aperture narrow start/ close intercom start/ close speakers stop/ start snapshot start / close the local video favorites channel switcher...
Page 35
Icon instruction: Icon Function instruction return to the main menu click on the pop-up menu, such as modifying parameters, name options shot catalogue device after pop-up, add the catalogue,, device and shot menu search the local shot 6.1.5.1 Modify the connection parameter , select “modify connect parameter”, then into “modify device”...
Page 36
A)Click “OK” button to save the current configuration. B)Click “cancel” button to cancel the modifying. 6.1.5.3 Delete , select “delete’ button to delete the current device directly Click on icon 6.1.5.4 Add the catalogue , select “add the catalogue” option, then pops up “add the catalogue” dialog box Click on icon A)Click “OK”...
Page 37
Icon Function instruction Open the camera and shoot the QR code to obtain the data. Save the device data Cancel to add the device. 6.1.5.6 Add the shot Please see the operation introduction of “add devices”. 6.1.5.7 Search the local device Click on the icon to enter “search”...
Page 38
After select an event type, start time and end time, clicking on the icon will list out the remote video lists, and then click on the item will be selected to play or download videos. 6.1.7 Alarm management Click the option of “alarm management” in the main menu Icon instruction:...
Page 39
Select the option those need to alarm and click the button “setup” to save the current settings; Click the button “cancel” to cancel the current settings. 6.1.7.2 Unguard to select the button “unguard”, cancel the current camera setting. Click on the icon 6.1.7.3 Note Click on the icon to select “note”...
Page 40
The icons instruction Icon Function instruction return to the alarm management search the alarm record page up page down 6.1.8 Local playback Click on “local playback” option in the main menu, and then into the interface as follows Click on the icon , the local playback video list change to editing states.
Page 41
Click on the icon , the local playback video list change to editing states. Select the image options that you want to delete , and then click on the icon to delete the selected local images. 6.1.10 Modify password Click on” modify password” option in the main menu, and then into the interface as follows: Click on the icon to save the current modified password 6.1.11 Local configuration Click on “local configuration”...
Page 42
Function instruction: Function Instruction PTZ length The camera rotation rate setting Do not disturb Alarm Info Tips switch Alarm voice Close the alarm voice Click on the icon to save the current configuration. 6.1.12 Help Click on “help” option in the main menu, and then into the interface as follows 6.1.12.1 Help Click on the button “...
6.1.12 Login out Click on “login out” option in the main menu, and then into the interface as follows Function instruction: Function Instruction Login out Log off the current user Cancel Cancel log off the current user 6.2 Instructions of IPhone 6.2.1 Essential condition 1) Support the version ios5.0 to ios7.0 of IPhone system.
Page 44
Hisilicon v2.0.0.81 and higher. 6.2.2 Installation and operation instructions Installation Support two installation modes and the user can choose one way for installation. 1. Install online Run the App Store program of iPhone. Switch to the search tag page, and input QMEYE in the search box to find the application installation package, then click <install> .After finishing installation, there will be QMEYE program icon on the mobile phone desktop.
Page 45
Enter the register information, click “register” then will be registered. Note: please enter the valid E-mail address in order to retrieve your password when you lost it. 6.2.3.3 Retrieve the password On the register clicking the button “login” and jump to “Retrieve password” interface. Input the username, click button “retrieve password”.
Page 46
Click “Favorites” button, go to “collection management” interface Select one of the devices on “Live list” enters the video preview interface. Button instruction: icons function instruction return to main menu move to the left move to the right move down move up enlarge narrow...
Page 47
zoom in aperture enlarge aperture narrow start/ close intercom start/ close speakers stop/ start snapshot start / close the local video favorites channel switcher 6.2.5 Device management Click the button” device management” on the main menu and enter “device management” interface. Icon instruction:...
Page 48
A)Click on the icon , return to the device management lists. B)Click on the icon , save the current configuration. 6.2.5.2 Modify the name , select the option “modify the name”, then pops up “modify name” or “modify the catalogue” dialog box. Click on the icon A)Click “OK”...
Page 49
6.2.5.5 Add the device Click on the icon to select “add the device” option. Icon instruction Icon Function instruction Open the camera and shoot the QR code to obtain the data. Save the device data Return the main menu 6.2.5.6 Add the shot Please see the operation introduction of “add devices”.
Page 50
Icon Function instruction return to device management pop up the option of “add menu” search the device again Click on the icon , then pop up the menu as follows: A)Add a device: add DVR (multi- channel) B)Add a shot: add a single camera (single channel) C)Modify the name: modify the name of the device or shot D)Modify IP: Modify the IP address, subnet mask, gateway information E)Modify the device password...
Page 51
Guarded Click the pop-up menu options 6.2.7.1 Guard to select “guard” option, pop up the dialog box as follows: Click on the icon Select the option those need to alarm and click the button “OK” to save the current settings; Click the button “Cancel” to cancel the current settings. 6.2.7.2 Unguard to select the button “unguard”, cancel the current camera setting.
Page 52
Delete the current number 6.2.7.4 Record Click on the icon to select “record” option , and then pop up the dialog of “alarm record” The icons instruction Icon Function instruction return to the alarm management search the alarm record page up page down 6.2.8 Local playback Click on “local playback”...
Page 53
6.2.9 Image view Click on “images browsing” option Click on the icon , the local playback video list change to editing states. Select the image options that you want to delete, and then click on the button delete to delete the selected local images. 6.2.10 Modify password Click on”...
Function instruction: Function Instruction PTZ length The camera rotation rate setting Do not disturb Alarm Info Tips switch Alarm voice Close the alarm voice Alarm languagece Alarm push language Click on the icon to save the current configuration. Chapter Seven FAQ (Frequently Asked Questions) 01:Why the DVR did not run after connect the power supply? ①Please check the power switch turn on or off at the rear panel of DVR.
Page 55
①The recording parameter setting is too low cause the record video quality overall down, sometime appears to mosaic; ②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic raising; Enjoy the use of your Conceptronic CCTV!
Need help?
Do you have a question about the C8CHCCTVKIT and is the answer not in the manual?
Questions and answers