Toner Meter Cycle (Tmc) Card Removal - Lexmark X543 Service Manual

Toner meter cycle (TMC) card removal

1.
Remove the right cover. See
2.
Remove the waste toner container. See
3.
Remove the imaging unit (IU). See
4.
Remove the rear shield. See
5.
Disconnect and remove the toner meter cycle card cable (A).
Note: Observe the routing for reinstallation.
6.
Remove the two plastic screws (B) and the two metal screws (C), and remove the card.
"Right cover removal" on page
"Waste toner bottle" on page
"Imaging unit (IU) removal" on page
"Rear shield removal" on page
4-7.
4-67.
4-40.
4-7.
Repair information
7525-xxx
4-61