Preliminary Information - Amplicomms BigTel 480 User Manual

4 Preliminary Information

Standby mode
All descriptions in this operating manual assume that the desktop
telephone and the handset are in Standby mode. The system switch-
es to Standby mode by replacing the receiver on the desktop tele-
phone or pressing the button
Navigating in the menu
All the functions can be accessed via the menu. The entire menu
structure can be found in the appendix.
Handset
The menu is opened in idle mode with the key
Use the arrow keys
Press the softkey under
To return to the main menu press the softkey under
Desktop telephone
The menu is opened in idle mode with the key
Use the arrow keys
Press the menu key
To return to the main menu press the key
Display icons
You are in an external call.
You are in an internal call.
Hands-free is activated (refer to the note on page 33.
The phone book is open
The key lock is activated (handset only).
The microphone is muted (handset).
on the handset.
.
and to move within the menu.
to open a sub menu.
.
and to move within the menu.
. to open a sub menu.
.
Helpline UK 0844 800 6503 (See page 56 for costs and hours of operation)
The microphone is muted (desktop telephone).
There are entries in the call list. Flashes, if there are new entries (
handset).
Flashes, if there are new entries in the call list. Steady on, if the call
CLIP
list is open (desktop telephone).
You have a message waiting on the network (depending on your
provider). Please contact your provider for information.
The ringer is set to "Off".
An alarm is set (handset only).
Steady on: handset within range of the base station/desktop telepho-
ne (handset only).
Flashing: handset out of range (handset only).
.
The answering machine is switched on (handset only).
Amplification is permanently on ( desktop telephone only ).
Batteries 100% full (handset only).
Batteries approx. 50% full (handset only).
Batteries nearly empty / recharge betteries (handset only).
During charging the icon is animated.
P I
RELIMINARY NFORMATION
35