Amplicomms BigTel 480 User Manual page 5

Hide thumbs Also See for BigTel 480:
Table of Contents

Advertisement

Charging the batteries
Before the handset is used for the first time, insert it in the charging
station for at least 16 hours.
The handset warms up during the charging process. This is normal
and does not represent a risk. Use only the adapter plug unit provid-
ed for the charging station. The battery status is shown on the dis-
play. When the battery capacity is nearly exhausted, the battery sym-
bol (
) will flash and "Battery Low" will appear in the display).
You should now put the handset for charging into the charging sta-
tion.
Setting the time and date
At initial operation the telephone does not have the correct time (e.g.
for entries in the call list). The display shows "12:00". You only have
to do this setting on one of the devices; the other one will take date
and time from that one.
Date and time are set in the menu (handset: Time -> Date and
Time / desktop telephone: Time -> Date & Time). In the case of
mains failure for the desktop telephone these settings will be lost.
Setting the display language
The display language is available in different languages. The default
setting is "English". Set the language using the menu (handset:
Handset -> Language / desktop telephone: Display -> Language).
The amendment applies only for the desktop telephone or the hand-
set.
Auto Answer (handset only)
If this function is activated, an incoming call is taken when the hand-
set is removed from the charging station. The automatic answering
function is activated and deactivated using the menu item "Handset
/ Auto Talk".
Helpline UK 0844 800 6503 (See page 56 for costs and hours of operation)
Hands-free operation (desktop telephone only)
The hands-free function only works if the receiver is placed on the
device.
If you have taken a call by pressing the hands-free button and then
lift the receiver, the loudspeaker will be switched off. The icon
disappears from the display.
If you now replace the receiver the call will be ended.
To switch hands-free on again, press the hands-free button
icon
lights up again and you can hang up the phone
and proceed in hands-free mode.
Press the hands-free button
P
T
REPARING THE
ELEPHONE
. The
to end the call.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents