Table of Contents
Advertisement
RETUNE
-
RETUNE L: the initial time of an automatic TA search is set to 90 seconds
max.
-
RETUNE S: the initial time of an automatic TA search is set to 30 seconds
max.
MASK DPI
-
MASK DPI: masks only the alternative frequency which has a different
program identification
-
MASK ALL: masks the alternative frequency which has a different
program identification and does not have an RDS signal with high field
strength
EON
-
Switch this function ON or OFF.
BEEP
-
ALL: when pressing the buttons of the unit a beep signal is heard
-
2nd: when pressing and holding the buttons of the unit a beep signal is
heard
-
OFF: when pressing the buttons of the unit no beep signal is heard
TA VOL
-
Adjust the volume of the traffic announcement.
ADJ
-
Set the time. Turn the VOLUME dial (13) to the right to set the hour. Turn
the VOLUME dial (13) to the left to set the minutes.
AUDIO DSP
-
Select EQ mode: CLASSIC, ROCK, POP, FLAT, NONE
5.7
Resetting the appliance
If any of the buttons on the appliance does not operate or if the error symbol
appears on the display, the appliance needs to be reset.
● Press the OPEN PANEL button (24) to release the panel.
● Press the RESET button (27).
ACA10
15
Advertisement
Table of Contents
