Asus Z10PA-U8/10G-2S User Manual page 158

5. When asked if you will load additional RAID controller drivers, select No, then press
<Enter>.
Do you wish to load any more
driver disks?
6. Follow the onscreen instructions to finish the OS installation.
7. When the installation is completed, DO NOT click Reboot. Press <Ctrl> + <Alt> +
<F2> to switch to the command-line interface from graphic user interface.
8. Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
6-6
More Driver Disks?
Yes No
Chapter 6: Driver installation